User:Bcl

Newbie on the anaconda team

Personal homepage

Maintainer of:

• pylint fedora package
• python-logilab-common fedora package
• python-logilab-astng fedora package

Anaconda Development

Development System

• Fedora 12
• squid proxy to cache packages
• lighttpd to serve up updates.img
• tftpd to serve up pxe boot images
• mock + pungi for building

mock setup

• yum install mock
• Edit the /etc/mock/site-defaults.cfg file to bind your working directories inside the mock root. This keeps mock from wiping those directories on --init

config_opts['plugin_conf']['bind_mount_enable'] = True
config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/home/user/projs/anaconda', '/root/anaconda' ))
config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/local/repo', '/repo' ))
config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/local/pungi', '/pungi' ))

• Edit the /etc/mock/ file for the distribution or copy it to a new name and edit
  • Add proxy=http://proxy.home:3128 to the main section.
  • comment out mirrorlist entries
  • Open up the mirror list url(s) in a browser and pick a mirror, use the same one for base and updates
  • Add baseurl=<mirror url> in each section instead of mirrorlist
  • Do this for each section with a mirrorlist
• Setup the initial mock environment, replace the fedora-13-i386 with the mock file edited above
  • mock -r fedora-13-i386 --init
  • mock -r fedora-13-i386 --no-clean --install pungi
• Enter the chroot - mock -r fedora-13-i386 --shell
  • Edit /usr/lib/anaconda-runtime/buildinstall
    • add proxy=http://proxy.home:3128 to the main section of the yum config embedded in it.
  • Edit /usr/lib/python2.6/site-packages/pypungi/__init__.py to add:

diff --git a/src/pypungi/__init__.py b/src/pypungi/__init__.py
index e57e72a..d30eefa 100644
--- a/src/pypungi/__init__.py
+++ b/src/pypungi/__init__.py
@@ -206,6 +206,8 @@ class Pungi(pypungi.PungiBase):
                 thisrepo.cost = repo.cost
             if repo.ignoregroups:
                 thisrepo.enablegroups = 0
+            if repo.proxy:
+                thisrepo.proxy = repo.proxy
             self.ayum.repos.add(thisrepo)
             self.ayum.repos.enableRepo(thisrepo.id)
             self.ayum._getRepos(thisrepo=thisrepo.id, doSetup = True)
-- 
1.6.6.1

This patch should be in the next release of pungi, but check to make sure just to be safe.

Now you have a mock chroot environment setup that will use the proxy cache for packages.

Building boot images

Use the compose and pungi.ks files below, place them into /root/ in the mock to be built. Replace REPO_URL_HERE with the same repo you selected for the mock's yum.conf file.

• pungi.ks

# un-comment the applicable repo

repo --name=fedora --baseurl=REPO_URL_HERE --proxy=http://proxy.home:3128

# Very small install footprint
%packages
@base
kernel
syslinux
nomtools
anaconda
%end

• compose

#!/bin/bash
echo "*** Running pungi --force --nosource --nodebuginfo --nosplitmedia -G -C -B -c /root/pungi.ks --ver=13"

pungi --cachedir=/pungi/cache --force --nosource --nodebuginfo --nosplitmedia -G -C -B -c /root/pungi.ks --ver=13
echo "*** Done."

• chmod a+x compose
• exit
• mock -r fedora-13-i386 --chroot "/root/compose"

Change the --ver to match whichever release you are building for

Building updates

Anaconda includes the ability to update itself by passing updates=http://path/to/update.img to the kernel at boot time. This allows you to use the same boot media and test changes to stage2 of the installer.

• This assumes a working mock chroot (ie. I built boot images with this one first)
• You need a git repo of Anaconda, I branch for the build so I don't clutter up master with build by-products.
  • git clone git://git.fedorahosted.org/anaconda.git
  • cd anaconda; git checkout -b build-updates
• bind the anaconda directory to the mock being used by editing /etc/mock/site-defaults.cfg as described above.
  • NOTE: DO NOT use mount -o bind to mount directories inside the mock. They will be obliterated the next time --init is run.
• enter the chroot
  • mock -v -r fedora-13-i386 --shell
  • Install the development tools group
    • yum groupinstall "development tools"
  • grab a copy of the current anaconda*src.rpm from someplace and install the dependencies with:
    • yum-builddep anaconda*src.rpm
  • now build anaconda
    • ./autogen.sh
    • ./configure
    • make updates
  • exit
• copy the updates.img over to the updates directory and optionally rename it
  • cp /var/lib/mock/fedora-13-i386/root/root/anaconda/updates.img /home/tftpboot/images/updates/

You can skip installing development tools and anaconda deps for subsequent iterations.

Now add updates=http://proxy.home/updates/updates.img to the kernel parameters when booting the install media.

NOTE: By running yum inside the chroot you may mess up the rpmdb version, this depends on how close your host system is to the target system. So YMMV

Build with a test anaconda.rpm

NOTE: This doesn't actually seem to work when the released anaconda version matches that in the branch. buildinstall isn't letting the local repo override the one in the repo

Normally when a punji build is done it pulls anaconda from the repo/proxy cache. Instead you want it to use your new build (ie. when doing stage1 development which cannot be updated by updates= being passed to the kernel)

• mount -o bind /home/bcl/Red_Hat/projs/anaconda/ /var/lib/mock/fedora-13-i386/root/root/anaconda/
• mock -v -r fedora-13-i386-proxy --shell
• cd /root/anaconda
• Removed the cached files. Otherwise it pull pull from there and not update to the latest
  • rm -rf /13
  • rm -rf /extra/released/pungi/cache/local
• ./autogen.sh
• ./configure
• make scratch
• rpmbuild -ts --nodeps anaconda...tar.gz
• yum-builddep /builddir/build/SRPMS/anaconda...src.rpm
• rpmbuild --rebuild /builddir/build/SRPMS/anaconda...src.rpm
• mkdir /repo
• cp /builddir/build/RPMS/anaconda...rpm /repo
• createrepo /repo
• edit /root/pungi.ks and add
  • repo --name=local --baseurl=file:///repo/
• exit
• mock -v -r fedora-13-i386 --chroot "/root/compose"
• rsync -avc /var/lib/mock/fedora-13-i386/root/13/i386/os/images/ /home/tftpboot/images/fedora/13/i386/

Boot with the pxe image and see what happens.

NOTE: The removal of the local repo cache is needed because yum gets confused by its presence.

Update boot.iso with new anaconda rpm

After you have a working boot.iso you can easily update it with the files from the new anaconda rpm you built above. Use the [| upd_bootiso] script to do this:

upd_bootiso boot.iso anaconda-13.35-1.fc13.i686.rpm

This will extract the files from initrd.img and install.img on the boot.iso, update the files and then re-build the boot.iso

This is considerably faster than using mock + pungi to compose a whole new iso from scratch.

Note, this script currently only works with x86 due to the fact that I borrowed part of it from the mk-images.x86 script and haven't built on other architectures yet.