From Fedora Project Wiki
Line 7: Line 7:
|| Versatile Express (Qemu) ||[[user|pwhalen]]  ||Disk Image||  || ||n/a    ||n/a  ||  ||
|| Versatile Express (Qemu) ||[[user|pwhalen]]  ||Disk Image||  || ||n/a    ||n/a  ||  ||
|-
|-
|| Pandaboard ||  || SD || || || || || ||   
|| Pandaboard ||[[user|pwhalen]]   || SD || {{result|pass}} || {{result|pass}} || {{result|pass}} || {{result|pass}} || ||  Tested on Pandaboard and ES.
|-
|-
|| Trimslice Bare/Value Pro || ||SD ||  || || || ||n/a||   
|| Trimslice Bare/Value Pro || ||SD ||  || || || ||n/a||   

Revision as of 15:08, 3 June 2013

Fedora 19

kernel-3.10.0-0.rc3.git0.1.fc19 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Tested on Pandaboard and ES.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank SATA n/a
Beagleboard XM n/a
Beaglebone MicroSD n/a

kernel-3.9.2-301.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Trimslice Bare/Value Pro pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
n/a
Trimslice Pro/H/H250 jkastner SATA
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Highbank pwhalen SATA
Pass pass
Pass pass
Pass pass
n/a n/a
Beagleboard XM n/a
Beaglebone MicroSD n/a

kernel-3.9.1-301.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Trimslice Bare/Value Pro pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
n/a
Trimslice Pro/H/H250 jkastner SATA
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
Highbank pwhalen SATA
Pass pass
Pass pass
Pass pass
n/a n/a Unstable, fpaste crashed system.
Beagleboard XM n/a
Beaglebone MicroSD n/a

kernel-3.9.0-301.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
Pass pass
n/a
Fail fail
Tested a9, a15.
Pandaboard pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
Fail fail
Booted using bootz, had to generate uInitrd manually. Tested on Pandaboard and Pandaboard ES
Trimslice Bare/Value Pro pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Warning warn
Pass pass
Pass pass
n/a n/a Initial Boot Took 3 boot attempts to come up.
Beagleboard XM n/a
Beaglebone pwhalen MicroSD
Fail fail
n/a Internal error: Oops - undefined instruction: 0 [#1] SMP ARM

kernel-3.9.0-0.rc8.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
Using new version of QEMU in F18-updates-testing -qemu-system-arm-1.2.2-11.fc18. Display not working, black screen when launched. Bugzilla Link
Pandaboard pwhalen SD
Fail fail
Using bootz, did not find rootfs. Using uboot-panda-2013.04-1.fc19 (bootz support) . bootcmd
Trimslice Bare/Value Pro pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
n/a
Trimslice Pro/H/H250 bconoboy SATA
Pass pass
Pass pass
Pass pass
n/a
Highbank pwhalen SATA
Warning warn
Pass pass
Pass pass
n/a n/a Boots but will reliably crash the system using fpaste, when system is then reset OOPS. Bugzilla Link.
Beagleboard XM n/a
Beaglebone pwhalen MicroSD
Fail fail
n/a OOPS

kernel-3.9.0-0.rc7.git3.1.fc19 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Using uboot-panda-2013.04-1.fc19 (bootz support) . bootcmd When attempting to use DTB, nothing past starting the kernel. Confirmed on both the Panda and Panda-ES
Trimslice Bare/Value Pro pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Warning warn
Pass pass
Pass pass
n/a n/a Kernel did not boot when restarted. BUG: soft lockup when attempting to use fpaste. OOPS at boot.
Beagleboard XM n/a
Beaglebone pwhalen MicroSD
Fail fail
n/a OOPS

kernel-3.9.0-0.rc7.git1.1.fc20 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Starting the kernel.. Manual boot with dtb from kernel package. DTB from firmware same.
Beagleboard XM n/a
Beaglebone pwhalen MicroSD
Warning warn
n/a Kernel boots after changing load address, but crashes during the boot

kernel-3.9.0-0.rc7.git0.2.fc19 (scratch build)

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Data Abort with uImage from package, running mkimage changing the load/entry address allows the kernel to boot, without dtb. Using dtb nothing past 'Starting the kernel'.
Trimslice Bare/Value Pro pwhalen SD
Pass pass
Warning warn
Pass pass
Pass pass
n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Warning warn
Pass pass
Pass pass
n/a n/a backtrace at bootBUG: soft lockup. When rebooting after crash.
Beaglebone pwhalen MicroSD
Warning warn
n/a Kernel boots using dtb from kernel package, like the Pandaboard mkimage used to change the load/entry address. Crashes during the boot fpaste of boot.

kernel-3.9.0-0.rc6.git2.3.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Inprogress inprogress
A9 - 'unwind: Unknown symbol address c0856604' when terminal left idle.
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Tested with dtb from firmware and kernel package. Nothing output after 'Starting the kernel...'
Beagleboard XM n/a

kernel-3.9.0-0.rc6.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
A9, A15 working. qemu-system-arm-1.4.0-9.fc19.x86_64.
Pandaboard pwhalen SD
Fail fail
Data Abort
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Uncompressing Linux... done, booting the kernel. Using firmware v2012.04-1.02 .v2012.04-1.01
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Starting the kernel..
Beagleboard XM n/a

kernel-3.9.0-0.rc6.git1.1.fc20

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64
Pandaboard dgilmore SD
Fail fail
Nothing past 'Starting the kernel' - using dtb from the kernel package.
Trimslice Bare/Value Pro pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
n/a Warm booted (3.8.6 > 3.9.0.rc6) with network, was able to ping another host initially, however repeated backtraces made system unusable. Reboot - nothing past 'Starting the kernel'. Issue with Gruboot and 3.9 kernels- limited dtb options - example).
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing past 'Starting the kernel' - using dtb from the kernel package and firmware.
Beagleboard XM n/a

kernel-3.9.0-0.rc6.git0.1.fc20

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
Tested A9,A15
Pandaboard SD
Trimslice Bare/Value Pro pwhalen SD
Warning warn
Fail fail
Pass pass
Pass pass
n/a IP from DHCP server, but unable to ping gateway/any host. Pinging self caused BUG: scheduling while atomic: swapper/0/0/0x40000100
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Warning warn
Pass pass
Pass pass
n/a n/a fpaste).
Beagleboard XM n/a

kernel-3.9.0-0.rc5.git2.1.fc19

To test all machines were installed with a F18 rootfs, (where possible yum updated to Fedora 19), then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64
Pandaboard pwhalen SD
Fail fail
Nothing past "Starting the Kernel" also tested with dtb from the kernel package, result being the same.
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Warm booted to login, then crashed - fpaste
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing past "Starting the Kernel" also tested with dtb from the kernel package.
Beagleboard XM n/a

kernel-3.9.0-0.rc4.git0.2.fc19

To test all machines were installed with a F18 rootfs, yum updated to Fedora 19, then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard pwhalen SD
Fail fail
Loading Kernel Image ... data abort
Trimslice Bare/Value Pro pwhalen SD
Warning warn
n/a Kernel booted to login, but crashed right after. fpaste. Subsequent booted attempts failed with nothing after - "Uncompressing Linux... done, booting the kernel".
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing after "Starting kernel ...". Also tested using DTB from kernel package, results were the same.
Beagleboard XM n/a

kernel-3.9.0-0.rc4.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a Not Tested Use f19 QEMU - f18 QEMU results in 'division by zero in the kernel'. Also tested and confirmed working with a15 dtb -v2p-ca15_ca7, confirmed in cpuinfo - CPU part - 0xc0f (Cortex A15).
Pandaboard pwhalen SD
Fail fail
Install boot Data Abort, system resets.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing further after 'Starting kernel ...' test with both dtb in firmware and dtb with kernel package.
Beagleboard XM n/a

kernel-3.9.0-0.rc3.git1.4.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Pandaboard pwhalen SD
Fail fail
During boot 'Loading Kernel Image ... data abort', System resets.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing past 'Starting the kernel..' , tried with dtb from kernel package with the same result.
Beagleboard XM n/a

kernel-3.9.0-0.rc1.git1.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a Division by zero in kernel
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Install. Dmesg snippet. Kernel will boot when warm booted from a 3.8 kernel (3.8 upgrade to 3.9, reboot works). When the system is then rebooted again (or shutdown and booted), it stops at 'Starting the Kernel..' . This was confirmed on both a Panda and Panda ES.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank dmarlin SATA
Fail fail
n/a Nothing past "Starting the kernel..", also boot attempted with dtb from kernel package with the same result.
Beagleboard XM n/a

kernel-3.9.0-0.rc1.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a Fpaste qemu-system-arm-1.2.2-6.fc18, using DTB.
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a

kernel-3.8.0-0.rc7.git0.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a Did not boot (with or without dtb)
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a

kernel-3.8.0-0.rc5.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a n/a
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
http://fpaste.org/sWoa/
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Install
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a

kernel-3.8.0-0.rc4.git1.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk image
Fail fail
n/a n/a n/a Using dtb added to the boot script, fpaste of boot
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard SD n/a
Pandaboard+XFCE
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Tested using U-Boot 2012.04.01-1.01, with dtb, fpaste
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a
Efika SmartTop iMX n/a

kernel-3.8.0-0.rc2.git3.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen
Fail fail
n/a n/a n/a fpaste
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard pwhalen SD
Fail fail
n/a fpaste
Pandaboard+XFCE
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a
Efika SmartTop iMX n/a

kernel-3.7.0-4.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen
Fail fail
n/a n/a n/a fpaste
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard SD n/a
Pandaboard+XFCE
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a
Efika SmartTop iMX n/a

kernel-3.7.0-0.rc3.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Storage Display Final Notes
Versatile Express (Qemu) pwhalen
Warning warn
Pass pass
Pass pass
selinux needs to be in permissive mode, dtb required.
Versatile Express+XFCE (Qemu)
Pandaboard pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
Pass pass
na selinux needs to be in permissive mode.
Pandaboard+XFCE pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
selinux needs to be in permissive mode.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen
Fail fail
n/a [fpaste]
Beagleboard XM
Kirkwood (sheevaplug, dreamplug, guruplug, etc)
Efika SmartTop iMX n/a



?

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank SATA n/a
Beagleboard XM n/a
Beaglebone MicroSD n/a