This page documents common bugs in Fedora 22 and, if available, fixes or workarounds for these problems. If you find your problem in this page, do not file a bug for it, unless otherwise instructed. Where appropriate, a reference to the current bug(s) in Bugzilla is included.
- 1 Release Notes
- 2 My bug is not listed
- 3 Installation issues
- 3.1 The installer icon is not shown on the desktop in KDE
- 3.2 Installer might not redraw its progress bar in KDE
- 3.3 Installer does not correctly compute the minimal required partition size when using network installation
- 3.4 GRUB boot loader doesn't list other Fedora installations when they are present on a separate harddisk
- 3.5 Liveinst run from terminal emulator on Plasma fails to start
- 3.6 Installer does not allow convenient removal of volumes including snapshots (btrfs, LVM) in manual partitioning
- 3.7 Filesystem encrypted with cyrillic or arabic language passphrase can not be decrypted at boot time
- 3.8 System installed on btrfs raid1 installed from live image fails to boot
- 3.9 Problems with firmware RAID
- 3.10 Failure when reformatting an encrypted LV
- 4 Upgrade issues
- 5 GNOME issues
- 5.1 PackageKit (GNOME Software, GNOME offline upgrades) ignores kernel modules updates from RPMFusion (VirtualBox, Nvidia driver, NDISwrapper, etc)
- 5.2 System hang when creating a user during GNOME first boot in basic graphics mode
- 5.3 GNOME login screen doesn't appear on certain dual-GPU Macbooks after installation
- 5.4 hp-plugin shows a blank gray window
- 5.5 Liveusb-creator displays just a blank window on Fedora 22
- 6 Plasma (KDE) issues
- 7 Network issues
- 8 Hardware issues
- 9 ARM issues
- 10 Fedora Server issues
- 11 Fedora Cloud issues
- 12 Other issues
Read the F22_release_announcement for specific information about changes in Fedora 22 and other general information.
My bug is not listed
Not every bug is listed in this page, but Bugzilla should be a comprehensive database of known bugs. This page is a sampling of the bugs most commonly discussed on our mailing lists and forums.
To see if your bug has already been reported, you can search Bugzilla. If it has not yet been reported, we encourage you to do so to help improve Fedora for yourself and others. A guide to Bugs and feature requests has been prepared to assist you.
If you believe an already-reported bug report should be added to this page because it is commonly encountered, you can:
- Add it yourself, if you have wiki access. Common bugs instructions provides guidance on how to add an entry to the page correctly, but the most important thing is to make sure that the bug is listed - don't worry if you don't get the format quite right, we can clean it up later.
- Or, add the CommonBugs keyword to the bug report. Someone from the QA team will then inspect the issue to determine whether the bug should be listed as a common bug. To expedite your request, please add a comment to the bug that includes
- a summary of the problem
- any known workarounds
- an assessment on the impact to Fedora users
For reference, you can query Bugzilla for bugs tagged CommonBugs:
- CommonBugs? (bugs with CommonBugs keyword, but do not yet have a link to this page)
- CommonBugs+(bugs with CommonBugs keyword and contain a link to this page)
The installer icon is not shown on the desktop in KDE
Unlike in previous Fedora releases, the installer launcher is no longer displayed on the desktop in KDE. You need to open the system menu to run the installer.
Installer might not redraw its progress bar in KDE
In certain environments (seen in KDE, might affect some others as well), sometimes the installer does not redraw its progress bar properly and seems stuck, even though the installation is making progress sucessfuly. This seems to be an issue with the widget toolkit or the display manager.
If the progress bar seems stuck for a long time and there's no progress indicated elsewhere, you can try to open and close the root password dialog, visible from the installation overview screen. You can also try to Alt+Tab between the installer and some other windows, to force it to redraw.
Installer does not correctly compute the minimal required partition size when using network installation
If you use the network install image (netinst), the installer will not always correctly warn you when your root partition is too small to contain the installed system. If the disk space runs out during package installation, anaconda reboots the machine without a warning, and the partial Fedora installation is broken and unusable. If this happens, please repeat the installation, but assign more space to the root partiton. For example, the absolute minimum for a Workstation package set is 6 GiB.
In the vast majority of cases, this issue does not affect Live or DVD (offline) installations. There is a very slight chance that if you set the partition to be almost exactly the same size as is the installed package set, the filesystem metadata will occupy enough space so that the installed system does not fit into the free space.
To be safe from this issue, please don't try to set an extremely small root partition.
GRUB boot loader doesn't list other Fedora installations when they are present on a separate harddisk
If there are other Fedora systems installed on a different disk than was the destination of current installation, they won't be listed in GRUB during startup. You can use BIOS to boot from a particular disk to work around this.
Liveinst run from terminal emulator on Plasma fails to start
Liveinst run from command line fails to start because LANGUAGE variable is empty. To run liveinst kickstart or --lang parameter must be provided. Installation can be also run by using graphical icon from menu.
Installer does not allow convenient removal of volumes including snapshots (btrfs, LVM) in manual partitioning
If you enter manual partitioning in the installer (a dialog where you're able to create your own partition layout, as opposed to a automatic partitioning dialog where you can only remove partitions), and you have some existing partitions which include a large number of snapshots (usually related to btrfs or LVM), the installer displays every single such snapshot as a separate system tree. In certain cases, it might be very difficult and tiring to remove some of those partitions including snapshots and keep others intact, because it would involve clicking and manually removing each of those partitions. The installer is not currently able to let you conveniently work with snapshotted volumes, or disks with ten or hundreds of partitions.
If you do not need to create your own partition layout and you don't need to preserve certain logical volumes/btrfs subvolumes, you can use the automatic partitioning dialog to delete unneeded partitions easily. In other cases, please use external tools to configure your disk layout to your needs first, and run Fedora installer after that.
Filesystem encrypted with cyrillic or arabic language passphrase can not be decrypted at boot time
Filesystem encrypted with cyrillic or arabic languages passphrase can not be decrypted at boot time. English (USA) keyboard layout (by default it is set as secondary layout for installation) is used for decryption, if you need to encrypt your system please use this layout for passphrase.
System installed on btrfs raid1 installed from live image fails to boot
If the system is installed on btrfs raid1 it won't be bootable. This problem occurs just when live media is used for installation. If you need btrfs raid1 use another media for example netinst.
Problems with firmware RAID
There are some bugs caused by firmware RAID. They are caused by the way how firmware RAID creates the RAID sets and by some remnants on used discs. This may cause RAID to not appear in Installation destination or anaconda to crash during installation. If you encounter any problems, try to format all used disks and recreate RAID. Sometimes it is enough to use different installation media (in case of RAID not appearing in Installation destination (RHBZ #1219264) it should work with netinst or DVD).
Failure when reformatting an encrypted LV
When trying to reformat an encrypted LV (i.e. an LV having LUKS+filesystem on top of it) in the installation process, the installer fails with a traceback. A workaround is to remove such LV before even unlocking it with the LUKS passphrase and create it again (**which deletes data on the LV just like the reformat**) as encrypted.
Upgrade from Fedora 20 complains about missing GPG keys with an outdated fedora-release
If you want to upgrade Fedora 20 to Fedora 22 using
fedup, you need to update
fedora-release package to version
fedora-release-20-4 first. Otherwise you'll encounter an error about missing GPG keys.
Please note that you should always fully update your system before starting a distribution upgrade.
Upgrade from Fedora 21 hangs at boot with an outdated systemd
If you want to upgrade Fedora 21 to Fedora 22 using
fedup, you need to update
systemd package to version
systemd-216-24.fc21 first. Otherwise the upgrade process will hang and not start. There is no data loss, just reboot, update systemd, and start
Please note that you should always fully update your system before starting a distribution upgrade.
PackageKit (GNOME Software, GNOME offline upgrades) ignores kernel modules updates from RPMFusion (VirtualBox, Nvidia driver, NDISwrapper, etc)
If you have installed a kernel module from RPMFusion repository (the most common are VirtualBox or the proprietary Nvidia graphics driver), you will not see updates to these kernel modules in PackageKit package manager, and therefore neither in GNOME Software application. This will also make main kernel updates ignored as well.
In order to install latest Linux kernel (very recommended due to occasional security issue) and the relevant modules from RPMFusion, please regularly run
sudo dnf update from a terminal.
System hang when creating a user during GNOME first boot in basic graphics mode
If you run the installer in "basic graphics" mode and do not create a user during the installation, you'll be offered to create the user the first time GNOME starts in the installed system. However, due to an issue with the basic graphics mode, the system will show you just an empty screen after the user is created, instead of logging you in or showing you the login screen. You'll need to reboot your computer, and then you'll be able to log in with your created user.
GNOME login screen doesn't appear on certain dual-GPU Macbooks after installation
On certain Macbook laptops with dual graphics cards, Fedora 22 Live environment boots fine, but after installation there's just black screen and no boot splash followed by a GNOME login screen. There seems to be an issue with Wayland, an upcoming window system, which is used in GNOME login screen.
It seems that users of affected laptops should be able to work around this issue by booting in a basic graphics mode (adding
nomodeset to the boot command line in GRUB), and then editing
/etc/gdm/custom.conf file and uncommenting the following line:
That will disable Wayland for GNOME login screen in future boots.
hp-plugin shows a blank gray window
In Fedora 22 the X.org server no longer runs under root. Due to this change hp-plugin shows a blank gray window. To workaround this run
hp-plugin -i to get text mode.
Liveusb-creator displays just a blank window on Fedora 22
In Fedora 22 the X.org server no longer runs under root. Due to this change liveusb-creator run on F22 Workstation shows just a blank window. To temporarily work around this issue run this command:
QT_GRAPHICSSYSTEM=native liveusb-creator. This should be fixed in liveusb-creator-3.14.1-1.fc22.
Plasma (KDE) issues
Initial setup sometimes starts in text mode instead of in graphics mode
Sometimes happens that initial setup starts in text mode instead of graphical mode. In that case you can proceed with text mode or disable initial-setup-text.service by running command
systemctl disable initial-setup-text.service as root and restart. The graphical initial setup should be provided then.
Some third-party application rpms bundle Qt5 erroneously (hipchat, viber)
Some third-party application rpms bundle Qt5 libraries incorrectly, which can cause runtime failures for other applications that depend on them. Problematic vendor rpms identified include hipchat and viber. Each vendor has been notified of the problem. If you have problems (especially for during fedora upgrades), it is recommended you uninstall these problematic rpms prior to upgrading.
Wired network is not connected automatically on boot if installed without network cable during installation
If you install Fedora 22 without an ethernet cable connected during installation, the network card will be configured to be disabled by default. It means that your installed system will not automatically connect to a wired network after you plug your cable in. You'll need to enable the wired connection manually every time (in GNOME, that can be done using the system menu in upper right screen corner).
In order to configure your wired connection to activate automatically, open your network preferences (in GNOME, that's in system menu -> Settings icon -> Network), go to Wired connection preferences -> Identity tab -> enable Connect automatically checkbox. Alternatively, you can edit
/etc/sysconfig/network-scripts/ifcfg-<interface_name> from console and replace
No network connection in VM when both host and guest installed from a Live image
If you install Fedora from a Live image, and then create a virtual machine on it and install another Fedora from a Live image as a guest, your networking in guest will probably not work. The is reason is that libvirt virtual network address ranges are the same both in the host and the guest and clash. This does not happen if you install the libvirt packages in guest manually at some point later (it is detected during package installation), just when you install from a LiveCD.
If you don't need libvirt to work in the VM, you can remove libvirt networking there by running
sudo virsh net-destroy default && sudo virsh net-undefine default, and then renewing the network connection in NetworkManager. If you need libvirt to work in VM, you need to edit its configuration files and assign a different IP range to it.
Fedora Server issues
Rolekit fails to deploy a Domain Controller on a virtual machine
Creation of a Domain Controller role requires the system to have a sufficient amount of entropy available to securely create the keys for the included certificate authority and Kerberos key distribution center. It is very common when deploying on a virtual machine that has just been created that there will not be sufficient entropy available, which will result in the Domain Controller deployment timing out waiting on
/dev/random and then failing with error code 256.
On VM hosts that support it (such as KVM on Fedora 20 and later or RHEL 7.1 and later), it is recommended to create the VM using the virt-RNG device (which the Fedora Server 22 guest will automatically detect). This will allow it to collect entropy from the host machine and should reduce the likelihood of encountering this issue. As a workaround (if you do not have a host capable of providing entropy), you can also run
su -c '/usr/sbin/rngd -r /dev/urandom' to make the system use the less-secure /dev/urandom entropy device.
For an in-depth explanation of entropy issues and how they can be resolved, see this excellent blog post.
Fedora Cloud issues
Arabic, Cyrillic, and Hebrew characters not displayed in console
The default console font in Fedora 22 has been changed to one ('eurlatgr') which provides greater coverage for Latin and Greek characters, but at the cost of Arabic, Cyrillic and Hebrew characters being dropped. It was intended that installations in languages which use the Arabic, Cyrillic or Hebrew characters should get a more appropriate default console font, but this has not yet been implemented.
Once the system is booted, the
setfont command can be used to change the console font - e.g.
setfont latarcyrheb-sun16 to use the old default. The font can be changed permanently by editing the file
/etc/vconsole.conf and changing the line - e.g. change it from to .
This change applies only to new installations; the font used by existing installations will not be changed on upgrade.
Mouse cursor get ocassionally de-synced in VMware
If you run Fedora 22 in VMware, sometimes the host mouse and the guest mouse get out of sync and "ungrabbed". VMware seems to be working on a proper solution in Linux kernel. In the mean time, you can disable automatic mouse capture by editing
preferences.ini in your VMware configuration directory and setting these values:
pref.motionUngrab = "FALSE" pref.grabOnMouseClick = "TRUE" pref.motionGrab = "FALSE"
You will then have to click to get the mouse cursor grabbed, and press Ctrl+Alt to have it ungrabbed.
Alternatively, you can adjust vmmouse configuration and run Xorg as root in the guest, as explained in bug 1214474#c41. That is not recommended from a security standpoint, however.
Attaching gdb or strace to your own process is blocked by Yama
There's now a bit more work involved if you want to attach gdb or strace to a process running under your own user. You can either do that under root, or configure
/proc/sys/kernel/yama/ptrace_scope. For more information, refer to the linked bug report and Yama documentation in Linux kernel.
Bad colors in gvim or terminals with light background
For the workstation spin, the default background color for vim was configured to dark in /etc/vimrc. This makes vim use ugly colors in gvim or terminals with a light background. To work-around this, use set background=light in your ~/.vimrc file.