This page documents common bugs in Fedora 34 and, if available, fixes or workarounds for these problems. If you find your problem in this page, please do not file a bug for it, unless otherwise instructed. Where appropriate, a reference to the current bug(s) in Bugzilla is included.
My bug is not listed
Not every bug is listed in this page, but Bugzilla should be a comprehensive database of known bugs. This page is a sampling of the bugs most commonly discussed on our mailing lists and forums.
To see if your bug has already been reported, you can search Bugzilla. If it has not yet been reported, we encourage you to do so to help improve Fedora for yourself and others. A guide to Bugs and feature requests has been prepared to assist you.
If you believe an already-reported bug report should be added to this page because it is commonly encountered, you can:
- Add it yourself, if you have wiki access. Common bugs instructions provides guidance on how to add an entry to the page correctly, but the most important thing is to make sure that the bug is listed - don't worry if you don't get the format quite right, we can clean it up later.
- Or, add the CommonBugs keyword to the bug report. Someone from the QA team will then inspect the issue to determine whether the bug should be listed as a common bug. To expedite your request, please add a comment to the bug that includes
- a summary of the problem
- any known workarounds
- an assessment on the impact to Fedora users
For reference, you can query Bugzilla for bugs tagged CommonBugs:
- CommonBugs? (bugs with CommonBugs keyword, but do not yet have a link to this page)
- CommonBugs+(bugs with CommonBugs keyword and contain a link to this page)
Compression not enabled for btrfs subvolumes renamed during install
If you use the "custom" partitioning UI during installation of Fedora 34 and change the name of any btrfs subvolume, its line in
/etc/fstab will lack the intended mount option. This is benign, affecting only fstab entries, unless the subvolume is mounted as root (
/); in this case, the entire installation will lack compression.
If you need to change the root subvolume name, e.g. to "@root", there are two possible workarounds:
Workaround A: change the subvolume name during installation, and then fix /etc/fstab after installation
- Change the subvolume name during installation.
- (optionally, to enable compression during installation) Immediately after beginning the installation process proper, switch to a shell (ctrl-alt-f2) and run
mount -o remount,compress=zstd:1 /mnt/sysimage. If you get an error, you were too fast, the installer hasn't yet mounted the filesystem - simply reissue the command until it returns without error. You can confirm it's enabled with
mount | grep btrfs.
/etc/fstabpost-install, either before or after rebooting from the install environment.
Workaround B: change the subvolume name change after installation
- Proceed with installation without changing the subvolume name.
- After installation, change the name of the root subvolume, and update the
/etc/fstab. setting on the appropriate line of
NOTE: It is safe to rename actively mounted subvolumes.
Some default keyboard layouts (Russian, Finnish...) not installed when they should be
We have identified a problem with Fedora 34 media which can mean that the expected default console keyboard layout for some languages is not installed. This affects several languages and layouts, including Russian (ru layout) and Finnish (fi layout); it affects any case where the default layout we want to use is in the Template:Kbd-legacy package.
When installing from a live image, or from the Server DVD image without the additional remote Fedora repository enabled, the installer will configure the system to use the intended layout, but will not be able to install the
package, because due to an oversight it was left off the install media. This will result in the system using the 'us' console keyboard layout, though it may indicate that the 'ru' or 'fi' (etc.) layout is configured.
If you are able to complete boot and log in using the 'us' layout, please do so, and then install the
package with a graphical package manager or by running
sudo dnf install kbd-legacy. This should resolve the issue. If you would like to avoid it at install time, please install from a network install image, or from the Server DVD image but with remote repositories enabled.
Upgrade to Fedora 34 may fail if i686 rdma-core package installed
If you try to upgrade to Fedora 34 with the
i686 package installed, the upgrade may fail with errors relating to that package. The i686 version of the package needs to be removed on upgrade to Fedora 34, but due to limitations in RPM we cannot make this happen automatically in all cases. If you encounter this issue, you can try using the argument for the upgrade; it should cause the upgrade to remove the package. Please do check it does not result in any other desired package being selected for removal.
Audio may not work after upgrade to Fedora 34 if pipewire was previously installed
Some users have reported that pipewire (the default audio framework in Fedora 34) may not work properly on update from older versions due to a configuration file format incompatibility. If you had pipewire installed in Fedora 32 or 33, it may stop working on upgrade to Fedora 34. If this happens to you, we recommend moving all
*.conf files out of
/etc/pipewire and reinstalling pipewire with
sudo dnf reinstall pipewire pipewire-pulseaudio. You will then need to re-apply any customizations you had made to the configuration files.
Upgrade does not install latest version of iptables, or fails on iptables if is used
A complex issue involving an attempt to split the iptables package combined with Fedora's package group definitions means that you may encounter problems related to the
package when upgrading to Fedora 34, if it is installed and the "Common NetworkManager Submodules" package group is installed.
If you use the Upgrading page - the upgrade may fail, complaining it cannot install the "best update candidate". If you do not use , the upgrade should not fail, but you may notice it warns about the same thing, and installs an older version of iptables and related packages (1.8.7-3.fc34) rather than the newer versions available from the updates repository.argument when upgrading - which is usually not necessary, and not recommended in the
We are currently considering ways to resolve this issue, but it's actually quite difficult. To work around it, we recommend simply not using
package - it is no longer needed, its functionality is retained in other subpackages).
Another option is to remove the
package before upgrade, and yet a third option is to mark the problematic group as not being installed before upgrading, with
dnf group mark remove networkmanager-submodules. If you do either of those, the upgrade should manage to upgrade directly to the latest packages.
GNOME Terminal, large selection can cause a crash
When making very large selections in GNOME Terminal, it can crash resulting in the loss of all Terminal instances. Upstream's current workaround is to limit select-all to visible text. Fedora is reverting that workaround, so it's possible very large selections will result in a crash.
Constant SELinux alerts if
If you have been upgrading your Fedora Linux since version 26 or earlier, you may end up with a
/etc/NetworkManager/VPN directory that is no longer needed but starts causing SELinux alerts in Fedora Linux 34:
"SELinux is preventing NetworkManager from 'watch' accesses on the directory /etc/NetworkManager/VPN"
In most cases this directory is empty and can be safely deleted as a workaround.
Akonadi fails to start after upgrade to Fedora 34, preventing KMail etc. from working correctly
It has been reported that after upgrading a KDE system to Fedora 34, the akonadi PIM server may fail to start correctly. This can prevent KMail and other apps that use Akonadi from working.
We are currently investigating this issue, but in the meantime, it has been reported that renaming
~/.config/share/akonadi will allow Akonadi to start up correctly. Of course, this will remove any local configuration that might be set there; you may be able to reapply it from the backup location after Akonadi has started successfully.
Copy/paste between host and Fedora 34 KDE guest using SPICE does not work
It has been reported that when running Fedora 34 KDE in a VM using the SPICE protocol (default for libvirt, virt-manager and Boxes virtualization), copy/paste between the host and the guest - and possibly other features relying on
spice-vdagent - does not work. We are still investigating this issue and hope to have a resolution soon.
ARM and AArch64 issues
Desktop images may require CMA allocation for graphical display
Some ARM and AArch64 SBC's (single board computers) may require CMA (Contiguous Memory Allocator) allocation added to the kernel parameters. This can be added with the
by using the option or in the grub menu during boot. If required, is sufficient for most desktops. Workstation uses a little more with recommended.
USB devices forwarded from the host to a guest aren't recognized in a libvirt virtual machine
If you use a libvirt machine through virt-manager and try to forward a USB device from the host to a guest (most likely a USB flash drive), the device might not be recognized correctly. The investigation of the issue is still ongoing. People reported that the problem might be worked around in some cases by attaching the device to the guest VM before the VM is actually started.
GDM login might fail with the error "fingerprint authentication didn't work"
After upgrading to Fedora 34, especially on a system that started life as a much older Fedora release (before Fedora 29), or a system where authentication configuration has been locally modified, Workstation users may see a login error message:
Sorry, fingerprint authentication didn't work. Please try again.
The error will appear even if you don't use fingerprint authentication and want to use a regular password instead.
If you upgraded before the fix for this (see above) was released and are stuck, you can switch to a virtual console (e.g.
sudo dnf --refresh update. After this, restart the system, and the bug should be resolved.
With the updated
package, you still might see the warnings, but they will not prevent logging in from working. In order to fully resolve the issue and make the warnings go away, it is a good idea to reset your authconfig files to the default state, with
sudo authselect select --force sssd with-fingerprint with-silent-lastlog.