X Window System (Graphics)
This section contains information related to the X Window System implementation, X.Org, provided with Fedora.
Faster X Start-up and Shutdown
Fedora 9 features a number of changes designed to make X faster in starting and shutting down and to make other improvements. Full details of the project can be found through this feature page:
X Configuration Changes
The X.Org 1.5.1
X server has been modified to automatically detect and configure most hardware, eliminating the need to modify the
/etc/X11/xorg.conf configuration file. The only hardware configured by default in the
xorg.conf configuration file written by Anaconda is:
- the graphics driver, and
- the keyboard map
All other hardware, such as monitors (both LCD and CRT), USB mice, and touchpads, should be detected and configured automatically.
The X server queries the attached monitor for supported resolution ranges, and attempts to pick the highest resolution available with the correct aspect ratio for the display. Set the preferred resolution in System > Preferences > Screen Resolution, and the default resolution for the system in System > Administration > Display.
/etc/X11/xorg.conf configuration file is not present, X automatically detects the appropriate driver, and assumes a 105-key US keyboard layout.
In certain situations, the
evdev driver was used, even when the
kbd driver was specified in
/etc/X11/xorg.conf. Removing the
evdev driver caused errors and warnings such as the following:
(WW) Warning, couldn't open module evdev (II) UnloadModule: "evdev" (EE) Failed to load module "evdev" (module does not exist, 0) (EE) No input driver matching <code>evdev' [config/hal] NewInputDeviceRequest failed (II) LoadModule: "evdev"
In Fedora 9, the XKB settings are read from
/etc/sysconfig/keyboard, which gives users the correct layout. The
KEYTABLE option, configured in
/etc/sysconfig/keyboard, also sets the layout for X. The
XKB_OPTIONS variables can be configured to customize XKB.
In Fedora 9 with the introduction of the new Xorg release and especially support for Randr Xinerama is slowly getting to be depreceated, especially now on the single graphic board configurations with multiple-outputs. More complicated settings (e.g., for multiple graphic cards in one computer) are still done with Xinerama only.
It is possible to configure multi-monitor spanning desktop without Xinerama using
Option "monitor-<identificator>" (where identificator can be obtained with
xrandr -q), adding additional
"Monitor" section for each monitor, and adding
Virtual option to the
"Screen" section. Details how to do it with well-written examples is available in this blogpost of Ulrich Drepper.
Third-party Video Drivers
Refer to the Xorg third-party drivers page for detailed guidelines on using third-party video drivers.