Consistent Network Device Naming
On Dell and HP servers with multiple network ports on the motherboard, name them lomX rather than ethX.
- Name: Matt Domsch
- Email: Matt_Domsch@dell.com
- Targeted release: Fedora 15
- Last updated: 2010-11-13
- Percentage of completion: 75%
Systems, particularly servers, with multiple network ports, name the ports ethX in a non-deterministic order, and are therefore not useful for system administrators.
The proposal is as follows:
- update biosdevname to upstream release 0.3.1 (in upstream git http://linux.dell.com/cgi-bin/gitweb/gitweb.cgi?p=biosdevname.git;a=summary)
- ensure postinstall udev uses biosdevname in udev rules to name LAN-on-Motherboard network ports from ethX to lom (done in biosdevname package)
- have kickstart / anaconda use the biosdevname-provided name lom (patch http://domsch.com/linux/biosdevname/0001-add-biosdevname-to-installer-environment.patch)
- add biosdevname to @base (patch http://domsch.com/linux/biosdevname/0001-add-biosdevname-to-base-as-a-default-package.patch)
Benefit to Fedora
System Administrators can then use BIOS-provided names, which are consistent and not arbitrarily named, for their network ports. This eliminates the confusion that non-deterministic naming brings, and eliminates the use of hard-coded MAC address based port renaming which a) is racy and error-prone, and b) introduces state into an otherwise stateless system.
This is only known to affect Dell PowerEdge 10G and newer servers, and HP 5G and newer servers, that expose network port labels in SMBIOS.
- See above
How To Test
- System-Under-Test must be a Dell PowerEdge 10g or newer server (PE 1950 III class, or R610 class), or HP ProLiant 380 (5G or 6G).
- biosdevname must be installed on the target system.
- erase /lib/udev/rules.d/70-persistent-net.rules file. This is where naming is persisted across reboots.
- reboot the system
- Following reboot:
- /sbin/ifconfig -a must show LAN-on-Motherboard ports named lom
- lom must correspond to the chassis labels. Verify using ethtool -p lom and watch the lights blink.
- /lib/udev/rules.d/70-persistent-net.rules should now have rules for lom and should correspond to chassis labels.
- Testing within anaconda TBD
LAN-on-Motherboard ports will be named lom rather than ethX
None necessary, revert to previous release behaviour.
- Servers often have multiple Ethernet ports, either embedded on the motherboard, or on add-in PCI cards. Linux has traditionally named these ports ethX, but there has been no correlation of the ethX names to the chassis labels - the ethX names are non-deterministic. Starting in Fedora 15, Ethernet ports on servers will have a new naming scheme corresponding to physical locations, rather than ethX. Ethernet ports embedded on server motherboards will be named em<port_number>, while ports on PCI cards will be named pci<slot_number>#<port_number>, corresponding to the chassis labels. Additionally, if the network device is an SR-IOV Virtual Function, the name will have a suffix of _<virtual_instance>.
By changing the naming convention, system administrators will no longer have to guess at the ethX to physical port mapping, or invoke workarounds on each system to rename them into some "sane" order.
Existing installations upgraded to Fedora 15 will not see a change in names unless /lib/udev/rules.d/70-persistent-net.rules is deleted and the HWADDR lines are removed from all /etc/sysconfig/network-scripts/ifcfg-* files.
This feature affects Dell PowerEdge 10G and newer servers (PowerEdge 1950 III family, PowerEdge R710 family, and newer), and HP ProLiant G6 servers and newer.