From Fedora Project Wiki

(Initial RSA II SOP)
 
(Add a note about the web/ssh interface.)
Line 18: Line 18:
== Restarting the RSA II card ==
== Restarting the RSA II card ==


To restart a hung RSA II card, cut off all power to the machine, wait a few seconds, and restart everything.
Normally, the RSA II can be restarted from the web/ssh interface.  If you are locked out of any outside access to the RSA II, follow these instructions on the physical machine.


To restart the card without rebooting the machine:
If the machine can be rebooted without issue, cut off all power to the machine, wait a few seconds, and restart everything.
 
Otherwise, to restart the card without rebooting the machine:


# Download and install the IBM Remote Supervisor Adapter II Daemon
# Download and install the IBM Remote Supervisor Adapter II Daemon

Revision as of 02:00, 12 August 2009

Shortcut:
ISOP:RSAII

Many of our physical machines use RSA II cards for remote management.


Contact Information

Owner: Fedora Infrastructure Team

Contact: #fedora-admin, sysadmin-main

Location: PHX, ibiblio

Servers: All physical IBM machines

Purpose: Provide remote management for our physical IBM machines

Restarting the RSA II card

Normally, the RSA II can be restarted from the web/ssh interface. If you are locked out of any outside access to the RSA II, follow these instructions on the physical machine.

If the machine can be rebooted without issue, cut off all power to the machine, wait a few seconds, and restart everything.

Otherwise, to restart the card without rebooting the machine:

  1. Download and install the IBM Remote Supervisor Adapter II Daemon
    1. yum install libusb-devel # (needed by the RSA II daemon)
    2. Download the correct tarball from http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5071676&brandind=5000008 (TODO: check if this can be packaged in Fedora)
    3. Extract the tarball and run ./install.sh --update
  2. Download and extract the IBM Advanced Settings Utility (http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=TOOL-ASU&brandind=5000016, warning: this tarball dumps files in the current working directory)
  3. Issue a
    ./asu64 rebootrsa
    to reboot the RSA II.
  4. Clean up: yum remove ibmusbasm64