From Fedora Project Wiki

< Infrastructure

Revision as of 21:12, 22 November 2021 by Kevin (talk | contribs) (Add directory permissions)

fedorapeople.org

This page covers the details on how to obtain and use your personal space on fedorapeople.org, a site where Fedora contributors can upload files to share with the world. It is perfect for uploading specfiles, SRPMs, patches, or personal Git repositories.

Forbidden contents

  • Do NOT distribute anything on fedorapeople.org that Fedora itself cannot distribute for legal reasons. Nothing on the ForbiddenItems list or otherwise non distributable by Fedora.
  • Do NOT upload your private ssh keys. While the Fedora Infrastructure Team works hard on keeping the servers secure, break-ins will happen and private keys uploaded can be downloaded and brute-forced easily. Private .ssh keys found during an audit will be deleted.

Accessing your fedorapeople.org space

  1. You need an active Fedora account
  2. You must be part of at least one group (other than the CLA group) in the Fedora account system. Often annotated as CLA+1
  1. You need to generate a ssh key (ssh-keygen -t rsa).
  2. Upload the ssh key into your Fedora account. To upload, visit this link and select your key file using the Public RSA SSH key field. Oftentimes, your public key can be found in your home directory under .ssh/id_rsa.pub. The ssh key will become activated within 20minutes after it is uploaded.
  3. To connect, use the ssh key you uploaded into your Fedora account:
ssh -i ~/.ssh/id_rsa <your_username>@fedorapeople.org
Important.png
Updating your SSH public key
If you want to update your SSH public key in fedorapeople.org, do NOT manually edit your .ssh/authorized_keys file. Go through the usual FAS account edit page and wait for it to be updated, or you will be locked out of your account.
  1. You will need to make a public_html directory for your files
  2. You will need to set permissions so the webserver can read them: chmod 0755 ~ public_html (This sets your home directory and public_html directories readable by the webserver)
  3. You may wish to make a 'index.html' file in public_html

Common answers

  • Each Fedora contributor has 2000000 KiB (approximately 1954 MiB) of quota-controlled space.
  • If you run out of space, you should clean up files you don't need. If you cannot clean anything up, you should contact Fedora Infrastructure team to raise your quota.
  • You need to change the permissions for your home directory to at least 711 to make it viewable.
chmod 711 $HOME
  • To make a publicly viewable space, create a public_html directory and set it's permissions to 755.
  • Fedora people is NOT to be used for development or repository creation. Repositories will need to be created elsewhere and uploaded via scp or rsync.
  • DO NOT try to use sudo to install packages you "need". Unless you are in the Infrastructure group and have gotten approval from sysadmin-main, extra packages are not to be installed on fedorapeople.org.
  • Upload files using scp, sftp, or rsync.
Idea.png
Using Nautilus
If you use GNOME, visit this page for an easy way to connect to your fedorapeople.org space.
Idea.png
Using Dolphin or Konqueror
If you use KDE, type sftp://your_username@fedorapeople.org in your file manager address bar for an easy way to connect to your fedorapeople.org space.
Idea.png
Using Thunar
If you use XFCE, press CTRL + L to bring up the Open Location dialogue and then enter sftp://your_username@fedorapeople.org/home/fedora/your_username in Location field for an easy way to connect to your fedorapeople.org space. PCManFM also works

To copy files from the command line, you can use scp

scp /path/to/file your_username@fedorapeople.org:/home/fedora/your_username/public_html


  • Once files are uploaded into the user's public_html directory, the files will become available at: https://your_username.fedorapeople.org/.
  • Give other users access to read/write/etc files by using extended ACLs. Read man pages for setfacl and getfacl for adding them to your dirs/files. This gives the user your_username read and write access to file:
setfacl -m u:your_username:rw file

fedorapeople.org git hosting support

fedorapeople.org now has support for hosting git repositories. This includes access via the git:// protocol for anonymous downloads as well as providing the cgit web interface.

Here is a quick rundown of how to get started with git on fedorapeople.org. It assumes that you are already somewhat familiar with git. You might want to take a look at the Git quick reference.

Create a ~/public_git directory on fedorapeople.org

ssh your_username@fedorapeople.org "mkdir ~/public_git; /sbin/restorecon -Rv ~/public_git"

Creating a new git repository in ~/public_git

As an example, here is one method to create an empty repository on your local system and upload it:

git init --bare repo.git
scp -r repo.git/ your_username@fedorapeople.org:~/public_git/

This creates a bare repository (i.e. a repository that has no working directory). It contains just the files that are part of the .git directory of a non-bare git repository (the kind most users are accustomed to seeing).

Important.png
Repository name must end with ".git"
cgit will not list repos that do not end with ".git".

Additionally if you wish your repository to show up in the cgit web interface, you must run the following command for any repositories you wish to appear there by default:

touch ~/public_git/yourgitrepo.git/git-daemon-export-ok

Uploading an existing repository to ~/public_git

If you have an existing repository you want to use on fedorapeople.org, you can do so easily:

git clone --bare /path/to/local/repo repo.git
scp -r repo.git/ your_username@fedorapeople.org:public_git/

The caveats from the previous section apply here as well.

Pushing to your repository

To push changes from a local repository:

cd /path/to/local/repo
git remote add fedorapeople your_username@fedorapeople.org:public_git/repo.git
git push --mirror fedorapeople

This creates a mirror of your local repository. All of the branches and tags in the local repository will be pushed to the fedorapeople.org repository.

If you only want to push selected branches, amend the git push example. For example, to push only your local master branch:

git push fedorapeople master


Idea.png
Allowing others to push
You can allow other fedorapeople.org users to push to your repository using extended ACLs (see setfacl(1) man page for details). However, if you have many others working on your project, using Pagure is strongly preferred.

Cloning your repository

To clone your repository, use a command similar to:

git clone git://fedorapeople.org/~your_username/repo.git


It is also possible to clone your project via the http:// protocol. In order for this to work, you must arrange to have git-update-server-info run whenever you update your repository. Typically, this is done with a post-update hook script. However, the user home directories on fedorapeople.org are mounted with the noexec option, which prevents the script from running. Instead, you may create a symbolic link to git-update-server-info in the hooks directory of your repository:

ssh your_username@fedorapeople.org
cd ~/public_git/repo.git/hooks
ln -svbf $(git --exec-path)/git-update-server-info post-update
git update-server-info


You also need to create a link from ~/public_html/git to ~/public_git:

cd ~/public_html
ln -svbf ../public_git git


You can clone your repository over http:// with a command similar to:

git clone http://your_username.fedorapeople.org/git/repo.git/


Idea.png
git:// versus http://
Only clone via http:// if you are behind a firewall that prevents git:// from working. The git:// protocol is faster and more efficient than the http:// protocol for git usage.

Browsing your project via cgit

You can see your project listed in cgit once the project list updates. This happens hourly.


Idea.png
Repository description
You can set the description for the repository that is displayed in cgit by editing the description file in your repository.

Shared repository

If you want to give access to your repository to other users you can do this with ACLs.

setfacl -R -m u:<user>:rwX <repo.git>
find <repo.git> -type d | xargs setfacl -R -m d:u:<user>:rwX

Enable per-repo upload-archive

If you want to allow your repository to be accessible via git archive --remote, you will need to set set the following in your repository's config file:

[daemon]   
uploadarch = true

Policies

Viruses

fedorapeople.org servers are regularly scanned for viruses, including people's home directories, because of the nature of providing download of user-uploaded files on a Fedora domain name. As soon as a virus is reported by the scanners, they will be scanned again by another scanner to make sure they're actual viruses (and not just an overly active scanner). If the second opinion also reports the file as being a virus, the file will be moved to a non-public facing directory, and the owner will be notified. If the user has not yet responded after a week, the file will be deleted.

---