From Fedora Project Wiki

m (internal link cleaning)
m (Update)
Line 1: Line 1:
== Installation ==
== Installation ==


The installation and initialization of the postgresql server is a little bit different in comparison to other packages and other linux distros. This document aims to summarize basic installation steps relevant to recent fedora release. In first place, you may consider to install newer version than is packaged for fedora, see [http://yum.postgresql.org/]. However, this is not recommended.
The installation and initialization of the postgresql server is a little bit different in comparison to other packages and other linux distributions. This document aims to summarize basic installation steps relevant to recent Fedora releases. In first place, you may consider to install newer version than is packaged for Fedora, see [http://yum.postgresql.org/]. However, this is not recommended.
 
$ sudo yum install postgresql-server postgresql-contrib
 
Or with dnf in Fedora 22 and later versions:


  $ sudo dnf install postgresql-server postgresql-contrib
  $ sudo dnf install postgresql-server postgresql-contrib
Line 46: Line 42:


The database initialization could be done using following command. It creates the configuration files postgresql.conf and pg_hba.conf
The database initialization could be done using following command. It creates the configuration files postgresql.conf and pg_hba.conf
$ sudo postgresql-setup initdb
Or on Fedora 22 and later:


  $ sudo postgresql-setup --initdb --unit postgresql
  $ sudo postgresql-setup --initdb --unit postgresql
Line 55: Line 47:
== Upgrade ==
== Upgrade ==


As you can see from error message in my example, it is not a fresh installation, but ugprade.
As you can see from error message in my example, it is not a fresh installation, but upgrade.


  Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: An old version of the database format was found.
  Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: An old version of the database format was found.
Line 86: Line 78:
== Tips and tricks ==
== Tips and tricks ==


For database management is comfortable to use graphical tools such as phpPgAdmin or pgadmin3
For database management is comfortable to use graphical tools such as phpPgAdmin or pgadmin3.
 
$ sudo yum install phpPgAdmin
$ sudo yum install pgadmin3
 
Or with dnf in Fedora 22 and later versions:


  $ sudo dnf install phpPgAdmin
  $ sudo dnf install phpPgAdmin
Line 100: Line 87:


PostgreSQL operates on port 5432 (or whatever else you set in your <code>postgresql.conf</code>). In firewalld you can open it like this:
PostgreSQL operates on port 5432 (or whatever else you set in your <code>postgresql.conf</code>). In firewalld you can open it like this:
  $ # make it last after reboot
  $ # make it last after reboot
  $ firewall-cmd --permanent --add-port=5432/tcp
  $ firewall-cmd --permanent --add-port=5432/tcp

Revision as of 09:14, 15 November 2020

Installation

The installation and initialization of the postgresql server is a little bit different in comparison to other packages and other linux distributions. This document aims to summarize basic installation steps relevant to recent Fedora releases. In first place, you may consider to install newer version than is packaged for Fedora, see [1]. However, this is not recommended.

$ sudo dnf install postgresql-server postgresql-contrib

The postgresql server is turned off and disabled by default. You can enable its start during the boot using following command:

$ sudo systemctl enable postgresql

You can start the postgresql server only when necessary as follows.

$ sudo systemctl start postgresql
Job for postgresql.service failed. See 'systemctl status postgresql.service' and 'journalctl -xn' for details.

The database needs to be populated with initial data after installation. The error log describes problem and its solution.

$ journalctl -xn
-- Logs begin at Mon 2013-11-04 14:38:33 CET, end at Thu 2013-11-14 11:45:56 CET. --
Nov 14 11:45:34 mlich-lenovo.usersys.redhat.com sudo[2054]: jmlich : TTY=pts/2 ; PWD=/home/jmlich ; USER=root ; COMMAND=/bin/systemctl status postgresql
Nov 14 11:45:37 mlich-lenovo.usersys.redhat.com sudo[2073]: jmlich : TTY=pts/2 ; PWD=/home/jmlich ; USER=root ; COMMAND=/bin/systemctl status postgresql
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com sudo[2105]: jmlich : TTY=pts/2 ; PWD=/home/jmlich ; USER=root ; COMMAND=/bin/systemctl start postgresql
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com systemd[1]: Starting PostgreSQL database server...
-- Subject: Unit postgresql.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit postgresql.service has begun starting up.
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: An old version of the database format was found.
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: Use "postgresql-setup upgrade" to upgrade to version 9.3.
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: See /usr/share/doc/postgresql/README.rpm-dist for more information.
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com systemd[1]: postgresql.service: control process exited, code=exited status=1
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com systemd[1]: Failed to start PostgreSQL database server.
-- Subject: Unit postgresql.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
--
-- Unit postgresql.service has failed.
--
-- The result is failed.

The database initialization could be done using following command. It creates the configuration files postgresql.conf and pg_hba.conf

$ sudo postgresql-setup --initdb --unit postgresql

Upgrade

As you can see from error message in my example, it is not a fresh installation, but upgrade.

Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: An old version of the database format was found.
Nov 14 11:45:56 mlich-lenovo.usersys.redhat.com postgresql-check-db-dir[2108]: Use "postgresql-setup upgrade" to upgrade to version 9.3.

With version 9 you can use upgrade tool. It is packaged as postgresql-upgrade:

$ postgresql-setup upgrade

Redirecting to /bin/systemctl stop  postgresql.service
Upgrading database: OK

The configuration files was replaced by default configuration.
The previous configuration and data are stored in folder /var/lib/pgsql/data-old.

See /var/lib/pgsql/pgupgrade.log for details.

The data are located at

  • /var/lib/pgsql/data
  • /var/lib/pgsql/data-old

The upgrade itself will backup your existing data and migrate your database. Don't forget to migrate your configuration (with meld for example: meld /var/lib/pgsql/data{,-old}/postgresql.conf).

You may need to switch postgresql to trust mode before update. This should be fixed already.

You can also upgrade by dumping your database and loading it again. For more information, see official documentation.

Tips and tricks

For database management is comfortable to use graphical tools such as phpPgAdmin or pgadmin3.

$ sudo dnf install phpPgAdmin
$ sudo dnf install pgadmin3


Firewall

PostgreSQL operates on port 5432 (or whatever else you set in your postgresql.conf). In firewalld you can open it like this:

$ # make it last after reboot
$ firewall-cmd --permanent --add-port=5432/tcp
$ # change runtime configuration
$ firewall-cmd --add-port=5432/tcp

In case of iptables:

$ iptables -A INPUT -p tcp --dport 5432 -m state --state NEW,ESTABLISHED -j ACCEPT

Bear in mind that you probably don't want to open your database server to the whole world.

SELinux

If you have SELinux enforced, you may run into trouble when trying to do some non-standard configuration. For example if you would like to change a location of your database, you have to add new context mapping for the new location:

$ semanage fcontext -a -t postgresql_db_t "/my/new/location(/.*)?"

If default port doesn't work for you, you may need to map postgre's port type to your desired port:

$ semanage port -a -t postgresql_port_t -p tcp 5433

If you install a webapp that wants to communicate with PostgreSQL via TCP/IP, you will have to tell SELinux to allow this on the webserver host:

# setsebool -P httpd_can_network_connect_db on

User Creation and Database Creation

Soon you run into need of creating a user (and database for the user). First, you have to switch user to interact with postgres:

# su - postgres

and then run postgre's interactive shell:

$ psql
psql (9.3.2)
Type "help" for help.

postgres=#

It might be good idea to add password for postgres user:

postgres=# \password postgres

Lets get back to user creation:

postgres=# CREATE USER lenny WITH PASSWORD 'leonard';
postgres=# CREATE DATABASE carl OWNER lenny;

this could be done from system shell too:

$ createuser lenny
$ createdb --owner=lenny carl

Configuration

The postgresql server is using two main configuration files

  • /var/lib/pgsql/data/postgresql.conf
  • /var/lib/pgsql/data/pg_hba.conf

systemd

Some configuration parameters are passed to daemon via command line options. This behaviour may override settings in postgresql.conf. For example, if you want to change the server's port number to 5433, create a file named "/etc/systemd/system/postgresql.service" containing:

.include /lib/systemd/system/postgresql.service
[Service]
Environment=PGPORT=5433


Note: changing PGPORT or PGDATA will typically require adjusting SELinux configuration as well; see section selinux.

Please follow the systemd documentation [2] for more details.

postgresql.conf

If you want postgres to accept network connections, you should change

listen_addresses = 'localhost'

to

listen_addresses = '*'

pg_hba.conf

Once your database is set up, you need to configure access to your database server. This may be done by editing file /var/lib/pgsql/data/pg_hba.conf. There are rules like this in the file:

# TYPE    DATABASE        USER            ADDRESS                 METHOD
  host    all             all             127.0.0.1/32            md5
  host    all             all             ::1/128                 md5
  local   all             postgres                                peer


First field stands for connection type. It can have these values:

  • local — Unix-domain socket
  • host — plain or SSL-encrypted TCP/IP socket
  • hostssl — is an SSL-encrypted TCP/IP socket
  • hostnossl — plain TCP/IP socket

Last column specifies which authentication method will be used.

  • md5 — client has to supply password processed with MD5 algorithm
  • ident — obtain user name of connecting client from operating system and consult it with specified map
  • trust — anyone who is able to connect to PostgreSQL server may act as any user without supplying password
  • peer — obtains user's name from operating system and checks if it matches database user name

When database server is authenticating client, it seeks for a record with matching connection type, client address, requested database and user name. As soon as it finds it, it performs the authentication. If authentication fails, no more subsequent records are taken into account. If no record matches, client's access is denied.

The default settings is usually restricted to localhost.

When you install your database server and at first you try to "make it work", you should turn off firewall, SELinux and make postgres' authentication permissive (bear in mind this will greatly expose your server, so do it only on trusted network — preferably without not network at all):

host    all             all             127.0.0.1/32            trust

As soon as you are able to connect, turn the security systems on one by one while verifying the connection can be established.

For more information see official documentation for pg_hba.conf file.

Optimisation

Default configuration of postgres is severely undertuned. It can handle simple application with not so often database access but if you require higher performance, you should configure your instance better. All the magic is happening in /var/lib/pgsql/data/postgresql.conf`. Also logging mechanism is configured not very intuitively.

Performance

Number of clients which may be connected to PostgreSQL at the same time:

max_connections = <number>

shared_buffers is the entry point. This is telling PostgreSQL how much memory is dedicated for caching. Setting this to 25% of total memory of your system is a good start. If it doesn't work for you, try to go for something between 15% - 40% of total memory.

shared_buffers = <memory unit>

This value is used by query planner to know how much memory is available in the system. Query planner uses this information to figure out whether plan fits into memory or not. Setting this to 50% of total memory is a common practise.

effective_cache_size = <memory unit>

When PostgreSQL performs sorting operations it plans its strategy whether to sort the query on disk or in memory. Bear in mind that this memory is available for every sorting instance. In case of multiple users submitting queries to your database server, this can rump up pretty high. Therefore this is tightly bound to max_connections.

work_mem = <memory unit>

For more information about this topic I advise you to read official documentation about tuning PostgreSQL.

Logging

By default, logs are rotated every week and you don't find much information in there (one could miss log level, date, time, ...). Also for simple web applications I prefer to increase verbosity.

log_destination = 'stderr'

This is just fine. If you would like syslog to take care of your logs, change it to 'syslog', or even 'syslog,stderr' (if you go for syslog, don't forget to configure syslog itself too; for more info, see official documentation)

logging_collector = on

In case of logging to stderr, postgres will grab all the logs if you enable logging_collector option.

This is default option:

log_filename = 'postgresql-%a.log'

Much preferred could be to name log files by date when they were created:

log_filename = 'postgresql-%G-%m.log'

Rotation. This really depends on the app itself. In case of simple app with a few data in database, all the logs may be kept persistently on disk without rotation.

log_truncate_on_rotation = off
log_rotation_age = 31d

Increase number of entries in log:

client_min_messages = notice      # default notice
log_min_messages = info           # default warning
log_min_error_statement = notice  # default error

If you would like to log slow queries, feel free to use this option:

log_min_duration_statement = 1000  # in ms

Default log entry doesn't contain much info:

FATAL:  Ident authentication failed for user "test"
DETAIL:  Connection matched pg_hba.conf line 84: "host    all             all             ::1/128                 ident"

Lets improve it to:

2013-12-30 17:51:36 CET testx@::1(50867):postgres [11213] FATAL:  password authentication failed for user "testx"
2013-12-30 17:51:36 CET testx@::1(50867):postgres [11213] DETAIL:  Connection matched pg_hba.conf line 84: "host   all             all             ::1/128                 md5 "

You just have to alter option log_line_prefix.

# %t -- timestamp
# %u -- user
# %r -- client's host
# %d -- database
# %p -- PID
log_line_prefix = '%t %u@%r:%d [%p] '

If you are running only single database with single user connecting, it would make more sense to simplify the prefix to

log_line_prefix = '%t [%p] '

Final recipe

log_destination = 'stderr'
logging_collector = on
log_filename = 'postgresql-%G-%m.log'
log_truncate_on_rotation = off
log_rotation_age = 31d
client_min_messages = notice
log_min_messages = info
log_min_error_statement = notice
log_line_prefix = '%t %u@%r:%d [%p] '

Reference