From Fedora Project Wiki

Revision as of 16:26, 24 May 2008 by Ravidiip (talk | contribs) (1 revision(s))

QA/TestCases/UserInterfaceSerial

Description

This test is intended to ensure that the console= parameter is honored and the post-installed systems is configured properly for a non tty0 console. While the examples mention the use of console=ttyS0, it it acceptable to use any device other than the default tty0.

Idea.png
This test case may require using a DB-9 serial cable to connect to the system under test. Additionally, you may be required to update the BIOS to enable the serial port.


Steps To Reproduce

1. Using a DB-9 serial cable, connect to your test system on the first port (typically S0) and start a serial port monitoring application (ttywatch, cermit, or minicom) 1. Boot installation program passing the console=ttyS0 command line parameter 1. Complete installation and boot into installed system

Expected Results

1. The installation displays properly works over the serial line 1. Confirm that a login console is presented over the serial device

  • When using upstart (Fedora9), you may confirm that the serial device is configured for login by examining the output of initctl. For example, 


serial (instance)
(start) running, process 1116




  • When using sysvinit (prior to Fedora9), you may confirm that the file /etc/inittab has a login entry for the requested serial port.  For example:


co:2345:respawn:/sbin/agetty ttyS1 115200 vt100-nav




1. The file /etc/securetty contains a line matching the requested console







Retrieved from "https://fedoraproject.org/w/index.php?title=QA:Testcase_Anaconda_User_Interface_serial_console&oldid=1931"