From Fedora Project Wiki

Revision as of 01:32, 3 December 2019 by Adamwill (talk | contribs) (create blivet no swap test case, based on regular custom no swap test case.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

An installation using advanced custom partitioning (blivet-gui) and without specifying a swap partition. When a system has sufficient memory, the installer should warn, but not restrict this request.

Setup

  1. Prepare a test system with a working, supported storage device of sufficient size for a Fedora install, and a Fedora installation medium that uses the GTK-based installer. Do not use Fedora Workstation live on Fedora 41+, as that uses the webui-based installer.

How to test

  1. Boot the GTK-based installer using any available means. Do not use Fedora Workstation live on Fedora 41+, as that uses the webui-based installer.
  2. Proceed to the installer's main screen, making sensible choices, and enter the Installation Destination screen.
  3. Ensure only the single target device you prepared is selected as the installation target disk.
  4. Ensure the Advanced Custom (Blivet-GUI) option is selected under Storage Configuration, and complete this screen.
  5. On the BLIVET GUI PARTITIONING screen, delete all existing partitions (if any).
  6. Create any necessary bootloader partitions (e.g. EFI System Partition for UEFI installs, BIOS Boot partition for BIOS installs onto a GPT disk, PReP boot partition for PowerPC installs).
  7. Create a /boot partition and set the filesystem type to ext4 or xfs.
  8. Create a root partition and set the filesystem type to ext4 or xfs.
  9. Complete the installation process, making sensible selections for all other installer options.
  10. Boot the installed system.

Expected Results

  1. The expected partition layout should be created on the target device(s).
  2. The install process should complete successfully and the installed system should boot as expected.
  3. Anaconda should warn that system performance may suffer without a swap partition (via a warning bar at bottom of screen when completing partitioning).
  4. Anaconda should allow the installation to complete successfully for systems with sufficient system memory. For systems with insufficient memory, anaconda must require the presence of a swap partition.
  5. No swap partition should be in use (you can check /proc/swaps).