From Fedora Project Wiki

No edit summary
No edit summary
Line 3: Line 3:
|actions=
|actions=
#Boot the installer using any available means (netinst/boot.iso, PXE, or DVD)
#Boot the installer using any available means (netinst/boot.iso, PXE, or DVD)
#In the<b>INSTALLATION SUMMARY<b>screen, [[QA:Anaconda partitioning#custom|custom partitioning mode]]
#In the<b>INSTALLATION SUMMARY</b>screen, [[QA:Anaconda partitioning#custom|custom partitioning mode]]
#At the manual partitioning screen, place the root filesystem(/) on an ext3 formatted partition,and proceed with installation
#At the manual partitioning screen, place the root filesystem(/) on an ext3 formatted partition,and proceed with installation
#Complete the installation
#Complete the installation

Revision as of 08:42, 17 January 2013

Description

A complete installation using the systems physical devices for the ext3 filesystem. A detailed look at the ext3 filesystem can be found at http://en.wikipedia.org/wiki/Ext3


How to test

  1. Boot the installer using any available means (netinst/boot.iso, PXE, or DVD)
  2. In theINSTALLATION SUMMARYscreen, custom partitioning mode
  3. At the manual partitioning screen, place the root filesystem(/) on an ext3 formatted partition,and proceed with installation
  4. Complete the installation

Expected Results

  1. Anaconda completes successfully
  2. Reboot successfully into installed system
  3. Confirm that rootfs partition is formatted as ext3 and is not a LVM or RAID volume