m (Updated live image URL and MD5SUM)
|Line 39:||Line 39:|
! Architecture !! MD5SUM
! Architecture !! MD5SUM
| [http://jlaska.fedorapeople.org/live/livecd-fedora-testday--.iso i386] ||
| [http://jlaska.fedorapeople.org/live/livecd-fedora-testday--x86_64.iso x86_64] ||
Revision as of 14:05, 31 March 2009
|Wed April 1, 2009||ALL DAY||#fedora-qa)|
What to test?
Today's instalment of Fedora Test Day will focus on the radeon driver for ATI Radeon graphics cards.
If you come to this page after the test day is completed, your testing is still valuable, and you can use the information on this page to test with your graphics card and provide feedback.
The following cast of characters will be available for testing, workarounds, bug fixes, and general discussion ...
What's needed to test
- An ATI Radeon (or FireGL) graphics adapter.
- Rawhide (tips on installing Rawhide below), or the live CD available for this test day (again see below).
- FAS Account - you can create an account in 3 minutes if you don't have one
- Your hardware profile uploaded to Smolt according to these instructions
How to test?
Update your machine
See the instructions on the Rawhide page on the various ways in which you can install or update to Rawhide. Or:
Optionally, you may download a non-destructive rawhide live image for your architecture. Tips on using a live image are available at FedoraLiveCD.
Follow each of these test cases:
- QA:Testcase_radeon_rendercheck (requires 15 minutes)
Multihead test case:
You will need two or more monitors to perform the multihead test.
Report your results
If you have problems with any of the tests, report a bug to Bugzilla. If you are unsure about exactly how to file the report, just ask on IRC and we will help you. Once you have completed the tests, add your results to the Results table below, following the example results from Adam Williamson as a template. The first column should be your name with a link to your User page in the Wiki if you have one, and the second should be a link to your Smolt hardware profile (see above for a link with instructions on submitting your hardware profile to Smolt). For each test case, if your system worked correctly, simply enter the word PASS. If you had trouble, enter the word FAIL, as a link to the bug report for the failure. If you could not perform one test (for example, you cannot perform the more advanced tests because the basic one fails, or you cannot perform the multihead test as you have only one display), enter the word N/A. In the comments column, you can enter the model name and PCI device ID (vendor ID is usually 1002) of your card, if you know it - you can usually find this information in the output of the command lspci -nn.
|User||Smolt Profile||Basic test||XVideo test||X restart test||DPMS test||GLX test||User switch test||VT switch test||Suspend test||Rendercheck test||Multihead test||Comments|
|Jerry Amundson||HW||tbd||tbd||tbd||tbd||tbd||tbd||tbd||tbd||tbd||N/A||ATI Technologies Inc RV610 [Radeon HD 2400 XT] [1002:94c1]|
|Alex Hudson||HW||N/A||ATI Technologies Inc RV710 [Radeon HD 4550] [1002:9540]|