From Fedora Project Wiki

Fedora 19

kernel-3.9.0-0.rc6.git0.1.fc20

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard SD
Trimslice Bare/Value Pro pwhalen SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen n/a
Beagleboard XM n/a

kernel-3.9.0-0.rc5.git2.1.fc19

To test all machines were installed with a F18 rootfs, (where possible yum updated to Fedora 19), then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Fail fail
A9, A15 emulation working when using the appropriate dtb, with A15 it was possible to increase the ram to 2G, A9 - 'vexpress-a9: cannot model more than 1GB RAM'. Highbank emulation did not work - " Warning: nic xgmac.1 has no peer" with no further output. qemu-system-arm-1.4.0-9.fc19.x86_64
Pandaboard pwhalen SD
Fail fail
Nothing past "Starting the Kernel" also tested with dtb from the kernel package, result being the same.
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Warm booted to login, then crashed - fpaste
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing past "Starting the Kernel" also tested with dtb from the kernel package.
Beagleboard XM n/a

kernel-3.9.0-0.rc4.git0.2.fc19

To test all machines were installed with a F18 rootfs, yum updated to Fedora 19, then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard pwhalen SD
Fail fail
Loading Kernel Image ... data abort
Trimslice Bare/Value Pro pwhalen SD
Warning warn
n/a Kernel booted to login, but crashed right after. fpaste. Subsequent booted attempts failed with nothing after - "Uncompressing Linux... done, booting the kernel".
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing after "Starting kernel ...". Also tested using DTB from kernel package, results were the same.
Beagleboard XM n/a

kernel-3.9.0-0.rc4.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a Not Tested Use f19 QEMU - f18 QEMU results in 'division by zero in the kernel'. Also tested and confirmed working with a15 dtb -v2p-ca15_ca7, confirmed in cpuinfo - CPU part - 0xc0f (Cortex A15).
Pandaboard pwhalen SD
Fail fail
Install boot Data Abort, system resets.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing further after 'Starting kernel ...' test with both dtb in firmware and dtb with kernel package.
Beagleboard XM n/a

kernel-3.9.0-0.rc3.git1.4.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Pass pass
Pass pass
n/a n/a
Pandaboard pwhalen SD
Fail fail
During boot 'Loading Kernel Image ... data abort', System resets.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen SATA
Fail fail
n/a Nothing past 'Starting the kernel..' , tried with dtb from kernel package with the same result.
Beagleboard XM n/a

kernel-3.9.0-0.rc1.git1.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a Division by zero in kernel
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Inprogress inprogress
Install. Dmesg snippet. Kernel will boot when warm booted from a 3.8 kernel (3.8 upgrade to 3.9, reboot works). When the system is then rebooted again (or shutdown and booted), it stops at 'Starting the Kernel..' . This was confirmed on both a Panda and Panda ES.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank dmarlin SATA
Fail fail
n/a Nothing past "Starting the kernel..", also boot attempted with dtb from kernel package with the same result.
Beagleboard XM n/a

kernel-3.9.0-0.rc1.git0.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a Fpaste qemu-system-arm-1.2.2-6.fc18, using DTB.
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a

kernel-3.8.0-0.rc7.git0.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a Did not boot (with or without dtb)
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a

kernel-3.8.0-0.rc5.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image
Fail fail
n/a n/a n/a
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard pwhalen SD
Pass pass
Pass pass
Pass pass
Pass pass
Fail fail
http://fpaste.org/sWoa/
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Install
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a

kernel-3.8.0-0.rc4.git1.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk image
Fail fail
n/a n/a n/a Using dtb added to the boot script, fpaste of boot
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard SD n/a
Pandaboard+XFCE
Trimslice Bare/Value Pro pwhalen SD
Fail fail
n/a Tested using U-Boot 2012.04.01-1.01, with dtb, fpaste
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a
Efika SmartTop iMX n/a

kernel-3.8.0-0.rc2.git3.2.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen
Fail fail
n/a n/a n/a fpaste
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard pwhalen SD
Fail fail
n/a fpaste
Pandaboard+XFCE
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a
Efika SmartTop iMX n/a

kernel-3.7.0-4.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen
Fail fail
n/a n/a n/a fpaste
Versatile Express+XFCE (Qemu) n/a n/a
Pandaboard SD n/a
Pandaboard+XFCE
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank n/a
Beagleboard XM n/a
Kirkwood (sheevaplug, dreamplug, guruplug, etc) n/a
Efika SmartTop iMX n/a

kernel-3.7.0-0.rc3.git2.1.fc19

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Storage Display Final Notes
Versatile Express (Qemu) pwhalen
Warning warn
Pass pass
Pass pass
selinux needs to be in permissive mode, dtb required.
Versatile Express+XFCE (Qemu)
Pandaboard pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
Pass pass
na selinux needs to be in permissive mode.
Pandaboard+XFCE pwhalen SD
Warning warn
Pass pass
Pass pass
Pass pass
Pass pass
Pass pass
selinux needs to be in permissive mode.
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen
Fail fail
n/a [fpaste]
Beagleboard XM
Kirkwood (sheevaplug, dreamplug, guruplug, etc)
Efika SmartTop iMX n/a



?

To test all machines were installed with a F18 rootfs, updated then rebooted. The kernel was installed and the machine rebooted again.

Hardware Who media boot Network Serial USB Display Final Notes
Versatile Express (Qemu) pwhalen Disk Image n/a n/a
Pandaboard SD
Trimslice Bare/Value Pro SD n/a
Trimslice Pro/H/H250 SATA n/a
Highbank pwhalen n/a
Beagleboard XM n/a