From Fedora Project Wiki
(→‎Current status: change announced and add devel list thread)
 
(9 intermediate revisions by 2 users not shown)
Line 5: Line 5:
= MAC Address Policy none <!-- The name of your change proposal --> =
= MAC Address Policy none <!-- The name of your change proposal --> =


{{Change_Proposal_Banner}}


== Summary ==
== Summary ==
<!-- A sentence or two summarizing what this change is and what it will do. This information is used for the overall changeset summary page for each release. Note that motivation for the change should be in the Benefit to Fedora section below, and this part should answer the question "What?" rather than "Why?". -->
<!-- A sentence or two summarizing what this change is and what it will do. This information is used for the overall changeset summary page for each release. Note that motivation for the change should be in the Benefit to Fedora section below, and this part should answer the question "What?" rather than "Why?". -->


The `systemd-udev` package installs `"/usr/lib/systemd/network/99-default.link"`,
The `systemd-udev` package installs `"/usr/lib/systemd/network/99-default.link"`, which sets
which sets `Link.MACAddressPolicy=persistent`. This proposal is to
`Link.MACAddressPolicy=persistent` for all software NIC devices. This proposal is to add to
change it to set `Link.MACAddressPolicy=none` to stop changing the MAC address.
the policy so that we use `Link.MACAddressPolicy=none` for bond/bridge/team devices.
This is particularly important for bridge and bond devices.
 
This change can either only apply to bridge/bond devices, or to various software devices. That is to be discussed.


== Owner ==
== Owner ==
Line 23: Line 19:
-->
-->
<!-- Include you email address that you can be reached should people want to contact you about helping with your change, status is requested, or technical issues need to be resolved. If the change proposal is owned by a SIG, please also add a primary contact person. -->
<!-- Include you email address that you can be reached should people want to contact you about helping with your change, status is requested, or technical issues need to be resolved. If the change proposal is owned by a SIG, please also add a primary contact person. -->
* Name: [[User:thaller|Thomas Haller]] (NetworkManager)
* Name: [[User:thaller|Thomas Haller]] (NetworkManager), [[User:dustymabe| Dusty Mabe]] (Fedora CoreOS)
* Email: <thaller@redhat.com>
* Email: <thaller@redhat.com>, <dmabe@redhat.com>
* Name: [[User:dustymabe| Dusty Mabe]] (Fedora CoreOS)
* Email: <dmabe@redhat.com>
 
<!--- UNCOMMENT only for Changes with assigned Shepherd (by FESCo)
<!--- UNCOMMENT only for Changes with assigned Shepherd (by FESCo)
* FESCo shepherd: [[User:FASAccountName| Shehperd name]] <email address>
* FESCo shepherd: [[User:FASAccountName| Shehperd name]] <email address>
-->
-->


== Current status ==
== Current status ==
[[Category:ChangeAnnounced]]
[[Category:ChangeAcceptedF38]]
<!-- When your change proposal page is completed and ready for review and announcement -->
<!-- When your change proposal page is completed and ready for review and announcement -->
<!-- remove Category:ChangePageIncomplete and change it to Category:ChangeReadyForWrangler -->
<!-- remove Category:ChangePageIncomplete and change it to Category:ChangeReadyForWrangler -->
Line 44: Line 36:
[[Category:SystemWideChange]]
[[Category:SystemWideChange]]


* Targeted release: [[Releases/37 | Fedora Linux 37 ]]  
* Targeted release: [[Releases/38 | Fedora Linux 38 ]]  
* Last updated: <!-- this is an automatic macro — you don't need to change this line -->  {{REVISIONYEAR}}-{{REVISIONMONTH}}-{{REVISIONDAY2}}  
* Last updated: <!-- this is an automatic macro — you don't need to change this line -->  {{REVISIONYEAR}}-{{REVISIONMONTH}}-{{REVISIONDAY2}}  
<!-- After the change proposal is accepted by FESCo, tracking bug is created in Bugzilla and linked to this page  
<!-- After the change proposal is accepted by FESCo, tracking bug is created in Bugzilla and linked to this page  
Line 53: Line 45:
-->
-->
* [https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/FZGH473ZUGPXK2E3GOEQ5TBLJ62FYJBC/ Devel list thread]
* [https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/FZGH473ZUGPXK2E3GOEQ5TBLJ62FYJBC/ Devel list thread]
* FESCo issue: <will be assigned by the Wrangler>
* FESCo issue: [https://pagure.io/fesco/issue/2824 #2824]
* Tracker bug: <will be assigned by the Wrangler>
* Tracker bug: [https://bugzilla.redhat.com/show_bug.cgi?id=2107754 #2107754]
* Release notes tracker: <will be assigned by the Wrangler>
* Release notes tracker: [https://pagure.io/fedora-docs/release-notes/issue/859 #859]


== Detailed Description ==
== Detailed Description ==
Line 65: Line 57:


With `MACAddressPolicy=persistent` udev's aim is to provide a stable MAC address, otherwise
With `MACAddressPolicy=persistent` udev's aim is to provide a stable MAC address, otherwise
the kernel will assign a random one. However, that can cause problems:
the kernel will assign a random one. However, that can cause problems.


Firstly, software devices are always created by some tool that has plans for the device. The tool may not
For interface types bridge/bond/team, an unset MAC address has a special meaning
expect that udev is going to change the MAC address and races against that. The best solution
for the tool is to set the MAC address when creating an interface. This will prevent
udev from changing the MAC address according to the MACAddressPolicy.
Otherwise, the tool should wait for udev to initialize the device to avoid the race. In theory, a
tool is always advised to wait for udev to initialize the device. However, if it were not for MACAddressPolicy,
in common scenarios udev doesn't do anything relevant for software devices to make that necessary.
 
Secondly, for interface types bridge and bond, an unset MAC address has a special meaning
to the kernel and the MAC address of the first port is used. If udev changes the MAC
to the kernel and the MAC address of the first port is used. If udev changes the MAC
address, that no longer works.
address, that no longer works.
Line 86: Line 70:
interfaces, the bond/bridge would get one of the well known MAC addresses. `MACAddressPolicy=persistent`
interfaces, the bond/bridge would get one of the well known MAC addresses. `MACAddressPolicy=persistent`
interferes with that.
interferes with that.
The goal of persistent policy is to provide a stable MAC address. Note that if the
tool or user who created the interface would want a certain MAC address, they
have all the means to set it already. That applies regardless whether the tool is
iproute2, NetworkManager, systemd-networkd. Neither NetworkManager nor systemd-networkd
rely on udev's MACAddressPolicy for setting the MAC address. This behavior is mostly
useful for plain `ip link add`, but it's unclear which real world user wants this behavior.
Of course, the user is welcome to configure the MAC address in any way they want. Including,
dropping a link file that sets `MACAddressPolicy=persistent`. The problem is once udev sets a MAC address,
it cannot be unset. Which makes this problematic to do by default.


While Fedora inherited this behavior from upstream systemd, RHEL-9 does not follow this behavior
While Fedora inherited this behavior from upstream systemd, RHEL-9 does not follow this behavior
Line 103: Line 76:
apply because the systemd there is too old to change the MAC address of most software devices.
apply because the systemd there is too old to change the MAC address of most software devices.


This could be either implemented by patching `/usr/lib/systemd/network/99-default.link`
The proposal here is to change to `MACAddressPolicy=none` for the device types where this causes
to have a different policy, or by dropping a link file with higher priority. In the latter
the most issues (bridge/bond/team).
case, that override could be shipped either by udev or even by NetworkManager.
 
Another option is to change the scope of this proposal to only change to
`MACAddressPolicy=none` for the device types where this causes the most issues
(bridge/bond/team).




Line 121: Line 89:
The goal here is to find out what the Fedora community thinks is the most appropriate default.
The goal here is to find out what the Fedora community thinks is the most appropriate default.


The RHEL-9 bug is [https://bugzilla.redhat.com/show_bug.cgi?id=1921094 [rh#1921094]].
The RHEL-9 bug is [https://bugzilla.redhat.com/show_bug.cgi?id=1921094 rh#1921094].
 
A Fedora bug after the change: [https://bugzilla.redhat.com/show_bug.cgi?id=2188280 #2188280]


== Benefit to Fedora ==
== Benefit to Fedora ==
Line 154: Line 124:
Pros:
Pros:


- Consistent behavior with RHEL8 and RHEL9.
- Consistent behavior with RHEL8 and RHEL9 for bond/bridge/team devices.
 
- Avoid race of udev and the tool that creates the interface.


- Bridge and bond interfaces can get the MAC addresses from their first port.
- Bridge and bond interfaces can get the MAC addresses from their first port.
Line 187: Line 155:


The main goal of this request is to generate productive discussion and find the desired behavior.
The main goal of this request is to generate productive discussion and find the desired behavior.
The implementation/changes are either way very simple.
The implementation/changes are simple to implement.


* Other developers: <!-- REQUIRED FOR SYSTEM WIDE CHANGES -->
* Other developers: <!-- REQUIRED FOR SYSTEM WIDE CHANGES -->
Line 213: Line 181:
<!-- What happens to systems that have had a previous versions of Fedora installed and are updated to the version containing this change? Will anything require manual configuration or data migration? Will any existing functionality be no longer supported? -->
<!-- What happens to systems that have had a previous versions of Fedora installed and are updated to the version containing this change? Will anything require manual configuration or data migration? Will any existing functionality be no longer supported? -->


After the change, the MAC address for the affected device types changes.
After the change, the MACAddressPolicy for bond/bridge/team device
types will be set to none.


<!-- REQUIRED FOR SYSTEM WIDE CHANGES -->
<!-- REQUIRED FOR SYSTEM WIDE CHANGES -->
Line 235: Line 204:
<!-- REQUIRED FOR SYSTEM WIDE CHANGES -->
<!-- REQUIRED FOR SYSTEM WIDE CHANGES -->


1) Create a software device two times, for example `ip link add type bridge`. Note
Create a bridge/bond interface without setting the MAC address. Note that if `MACAddressPolicy=none`,
that the MAC address is either stable or random, depending on the `MACAddressPolicy=`.
 
2) Note that if the software device has the MAC address set initially, udev does not
change it (`ip link add address aa:aa:aa:aa:aa:aa type bridge`). That depends on
`/sys/class/net/$dev/addr_assign_type`.
 
3) Create a bridge/bond interface without setting the MAC address. Note that if `MACAddressPolicy=none`,
the MAC address is random at first. Note that attaching the first port will update the controller's MAC address.
the MAC address is random at first. Note that attaching the first port will update the controller's MAC address.
On the other hand, with `MACAddressPolicy=persistent`, the MAC address of the controller is fixed
On the other hand, with `MACAddressPolicy=persistent`, the MAC address of the controller is fixed
and not inherited from the port.
and not inherited from the port.
4) Run
  ip monitor link &
  while : ; do
    ip link del xxx
    ip link add name xxx type dummy \
    && ip link set xxx addr aa:00:00:00:00:00 \
    && ip link show xxx | grep -q aa:00:00:00:00:00 \
    || break
  done
to reproduce the race between a simple tool and udev changing the MAC address.


== User Experience ==
== User Experience ==
Line 273: Line 221:
-->
-->


Bond/bridge devices would again get assigned the MAC address of the first NIC added to the device.
Bond/bridge/team devices would again get assigned the MAC address of the first NIC added to the device.
 
If we chose to not limit the scope of this change to just bonds/bridges then all software devices would get randomly assigned MAC addresses.
 


== Dependencies ==
== Dependencies ==

Latest revision as of 13:13, 20 April 2023


MAC Address Policy none

Summary

The systemd-udev package installs "/usr/lib/systemd/network/99-default.link", which sets Link.MACAddressPolicy=persistent for all software NIC devices. This proposal is to add to the policy so that we use Link.MACAddressPolicy=none for bond/bridge/team devices.

Owner

Current status

Detailed Description

On Fedora, udev by default changes the MAC address of a wide range of software devices. This was introduced by systemd 242 in early 2019 (Fedora 31), when MACAddressPolicy= was extended to affect more types of devices.

With MACAddressPolicy=persistent udev's aim is to provide a stable MAC address, otherwise the kernel will assign a random one. However, that can cause problems.

For interface types bridge/bond/team, an unset MAC address has a special meaning to the kernel and the MAC address of the first port is used. If udev changes the MAC address, that no longer works. Now the generated MAC address is not directly discoverable as it is based on /etc/machine-id (machine-id(5)), among other data. Even if there were a tool to easily calculate the MAC address, it could be cumbersome to use it without logging into the machine first. The MAC address can directly affect the assigned IP address, for example when using DHCP. When booting a new virtual machine, the user might know the MAC address of the (virtual) "physical" interfaces. When bonding/bridging those interfaces, the bond/bridge would get one of the well known MAC addresses. MACAddressPolicy=persistent interferes with that.

While Fedora inherited this behavior from upstream systemd, RHEL-9 does not follow this behavior (centos9, rh#1921094). For RHEL-8, this doesn't apply because the systemd there is too old to change the MAC address of most software devices.

The proposal here is to change to MACAddressPolicy=none for the device types where this causes the most issues (bridge/bond/team).


Feedback

This was also discussed on upstream systemd mailing list here. The upstream systemd maintainers' opinion is that the current udev behavior is desirable, but accepts that distributions (or network stacks such as NetworkManager) may choose to change the default depending on their needs (reference). The goal here is to find out what the Fedora community thinks is the most appropriate default.

The RHEL-9 bug is rh#1921094.

A Fedora bug after the change: #2188280

Benefit to Fedora

Pros:

- Consistent behavior with RHEL8 and RHEL9 for bond/bridge/team devices.

- Bridge and bond interfaces can get the MAC addresses from their first port.

In the case of MACAddressPolicy=none for a bond (or bridge) the bond will get a MAC related to one of its physical NIC devices. In the case of provisioning new systems (especially in a large datacenter) information about the server can be used to configure the network environment (DHCP, Firewall, etc) before the server is ever even powered on. This does mean that you may have to update your network environment configuration if you replace a NIC (con), but that you won't have to update your network environment configuration if you re-install your server (pro), which is what you'd have to do now with MACAddressPolicy=persistent.

Cons:

- Deviate from upstream systemd.

It is desirable that RHEL and Fedora behaves similar. A possible outcome could be the current behavior stays and RHEL 10 would change behavior. On the other hand, different distributions (or even Fedora spins) have different uses and needs. Deviating might be fine. In the same vein, there is also a desire to stay close to upstream systemd behavior. But the uses of systemd project go beyond Fedora/RHEL, so deviating here may also be fine.


Scope

  • Proposal owners:

The main goal of this request is to generate productive discussion and find the desired behavior. The implementation/changes are simple to implement.

  • Other developers:

Other projects that wish a certain MAC address are welcome to set it for their devices. Including using udev's MACAddressPolicy.

  • Release engineering:

Not needed for this change.

  • Policies and guidelines: N/A (not needed for this Change)
  • Trademark approval: N/A (not needed for this Change)
  • Alignment with Objectives:

Upgrade/compatibility impact

After the change, the MACAddressPolicy for bond/bridge/team device types will be set to none.


How To Test

Create a bridge/bond interface without setting the MAC address. Note that if MACAddressPolicy=none, the MAC address is random at first. Note that attaching the first port will update the controller's MAC address. On the other hand, with MACAddressPolicy=persistent, the MAC address of the controller is fixed and not inherited from the port.

User Experience

Bond/bridge/team devices would again get assigned the MAC address of the first NIC added to the device.

Dependencies

None.


Contingency Plan

  • Contingency mechanism: (What to do? Who will do it?)

If the change is rejected, nothing needs to be done. The change itself will be simple to implement.

  • Contingency deadline: beta freeze
  • Blocks release? No


Documentation

TODO.

Release Notes