From Fedora Project Wiki
(Update)
(Retarget to Fedora 20 as agreed by FESCo on 2013-03-20 meeting due to missing Feature Freeze deadline)
 
(7 intermediate revisions by 2 users not shown)
Line 2: Line 2:


== Summary ==
== Summary ==
'''Specfile is posted for review:''' https://bugzilla.redhat.com/show_bug.cgi?id=807821


Design packaging scheme for ns-3 network simulator and provide it in Fedora.
Design packaging scheme for ns-3 network simulator and provide it in Fedora.


Pretty usable spec file (C++ and Python simulations work) for ns-3 version 3.14 pulled from hg repository is available:
Pretty usable spec file (both C++ and Python simulations work) for ns-3 version 3.16 is available at that bug report along with required patches.


[http://www.inf.uniri.hr/~vmiletic/ns-3/ns.spec specfile]
Still missing:
 
* visualizer (TODO, should be easy),
still missing: nsc (TODO), click (TODO), openflow (might consider it when/if Blake Hurd's changes go upstream, see below for details).
* click (TODO, should be a bit of work but not too hard),
 
* openflow (might consider it when/if Blake Hurd's changes go upstream, see below for details).
To use the specfile, you must:
* get ns-allinone-3.13.tar.bz2 and unpack it, manually rename ns-allinone-3.13 to ns-allinone-3.14, remove ns-3.13 inside of it
* get ns-3-dev using Mercurial, patch it with patch in this bug https://www.nsnam.org/bugzilla/show_bug.cgi?id=1327
* manually rename ns-3-dev to ns-3.14 and move it inside ns-allinone-3.14
* change ns-allinone-3.14/ns-3.14/VERSION from 3-dev to 3.14
* make an archive
tar cvjf ns-allinone-3.14.tar.bz2 ns-allinone-3.14
 
Once ns-3.14 is out, all this will not be needed.


To use ns-3 when installed via RPMs, you must use pkgconfig, e.g.
To use ns-3 when installed via RPMs, you must use pkgconfig, e.g.


  $ g++ first.cc `pkg-config --libs --cflags libns3.14-core-debug libns3.14-network-debug libns3.14-internet-debug libns3.14-point-to-point-debug libns3.14-applications-debug`
  $ g++ first.cc `pkg-config --libs --cflags libns3.16-core-debug libns3.16-network-debug libns3.16-internet-debug libns3.16-point-to-point-debug libns3.16-applications-debug`


== Owner ==
== Owner ==
Line 32: Line 24:
== Current status ==
== Current status ==


* Targeted release: [[Releases/17 | Fedora 17]]  
* Targeted release: [[Releases/20 | Fedora 20]]  
* Last updated: 2012-01-11
* Last updated: 2013-03-20
* Percentage of completion: 85%
* Percentage of completion: 60%


== Detailed Description ==
== Detailed Description ==
Line 42: Line 34:
ns-3 is intended as an eventual replacement for the popular ns-2 simulator." ([http://www.nsnam.org/ ns-3 home page])
ns-3 is intended as an eventual replacement for the popular ns-2 simulator." ([http://www.nsnam.org/ ns-3 home page])


For now, we package ns-3.14 development version, but it's very likely that final version will be available in time for Fedora 17, so we will upgrade to that. The reason why we have choosen to target Fedora 17 even though spec has been ready for a while is to take time to work with upstream on fixing issues in the installation process, so it's highly likely that we will be able to package ns-3 without any extra patches.
For now, we package ns-3.16 with some extra patches which will eventually be upstreamed (hopefully, at least).


== Benefit to Fedora ==
== Benefit to Fedora ==
Line 68: Line 60:
Definitly needed:
Definitly needed:
* everything mentioned in [http://www.nsnam.org/wiki/index.php/Installation#Fedora.2FRedHat Fedora installation at nsnam wiki]
* everything mentioned in [http://www.nsnam.org/wiki/index.php/Installation#Fedora.2FRedHat Fedora installation at nsnam wiki]
* [http://code.google.com/p/waf/ waf], already in Fedora (ns-3 version 3.13 uses customized waf 1.6.7; probably not a problem, since it's bundled with ns-3 and needed only for building)
* [https://launchpad.net/pybindgen PyBindGen], bundled in ns-3-allinone
* [http://networkx.lanl.gov/pygraphviz/ PyGraphviz], should be similar to NetworkX in terms of packaging (TODO), https://bugzilla.redhat.com/show_bug.cgi?id=740687


Not needed but will package since it's easy to do:
Not needed but will package since it's easy to do:
* [http://networkx.lanl.gov/pygraphviz/ PyGraphviz], should be similar to NetworkX in terms of packaging (TODO), https://bugzilla.redhat.com/show_bug.cgi?id=740687
* [http://research.wand.net.nz/software/nsc.php NSC], bundled in ns-3-allinone
* [http://research.wand.net.nz/software/nsc.php NSC], bundled in ns-3-allinone
* [http://www.read.cs.ucla.edu/click/ Click Modular Router] ([https://bugzilla.redhat.com/show_bug.cgi?id=709082 bug 709082])
* [http://www.read.cs.ucla.edu/click/ Click Modular Router] ([https://bugzilla.redhat.com/show_bug.cgi?id=709082 bug 709082])
Line 79: Line 69:
* [http://lxc.sourceforge.net/ LXC], already in Fedora
* [http://lxc.sourceforge.net/ LXC], already in Fedora
* [http://www.openflow.org/ OpenFlow], [http://code.nsnam.org/bhurd/openflow Blake Hurd's modified OpenFlow that works with ns-3]
* [http://www.openflow.org/ OpenFlow], [http://code.nsnam.org/bhurd/openflow Blake Hurd's modified OpenFlow that works with ns-3]
* [http://www.nsnam.org/wiki/index.php/NetAnim NetAnim 2.0]
* [http://www.nsnam.org/wiki/index.php/NetAnim NetAnim 3.0]
* [http://yans.pl.sophia.inria.fr/trac/nepi NEPI/NETNS/NEF]
* [http://yans.pl.sophia.inria.fr/trac/nepi NEPI/NETNS/NEF]


Line 101: Line 91:




[[Category:FeatureAcceptedF17]]
[[Category:FeaturePageIncomplete]]
<!-- When your feature page is completed and ready for review -->
<!-- When your feature page is completed and ready for review -->
<!-- remove Category:FeaturePageIncomplete and change it to Category:FeatureReadyForWrangler -->
<!-- remove Category:FeaturePageIncomplete and change it to Category:FeatureReadyForWrangler -->

Latest revision as of 19:14, 20 March 2013

ns-3 Network Simulator

Summary

Specfile is posted for review: https://bugzilla.redhat.com/show_bug.cgi?id=807821

Design packaging scheme for ns-3 network simulator and provide it in Fedora.

Pretty usable spec file (both C++ and Python simulations work) for ns-3 version 3.16 is available at that bug report along with required patches.

Still missing:

  • visualizer (TODO, should be easy),
  • click (TODO, should be a bit of work but not too hard),
  • openflow (might consider it when/if Blake Hurd's changes go upstream, see below for details).

To use ns-3 when installed via RPMs, you must use pkgconfig, e.g.

$ g++ first.cc pkg-config --libs --cflags libns3.16-core-debug libns3.16-network-debug libns3.16-internet-debug libns3.16-point-to-point-debug libns3.16-applications-debug

Owner

Current status

  • Targeted release: Fedora 20
  • Last updated: 2013-03-20
  • Percentage of completion: 60%

Detailed Description

"ns-3 is a discrete-event network simulator for Internet systems, targeted primarily for research and educational use. ns-3 is free software, licensed under the GNU GPLv2 license, and is publicly available for research, development, and use.

ns-3 is intended as an eventual replacement for the popular ns-2 simulator." (ns-3 home page)

For now, we package ns-3.16 with some extra patches which will eventually be upstreamed (hopefully, at least).

Benefit to Fedora

Fedora will be more attractive to researchers, teachers and students in field of computer networks since it will be much easier to install and use ns-3.

ns-2 is widely used in academia, and it's expected that ns-3 will follow that suit. There are already a couple of courses using ns-3. (Tom Henderson keynote at WNS3 2011 mentions three, but there are at least three more: CS641 at Indian Institute of Technology Bombay, S-38.2188 at Aalto University, CS640 at Brigham Young University)

Scope

This is an isolated change, that requires adding packages to Fedora. ns-3 has quite some dependancies, and most of them are already in Fedora (see below).

How To Test

Tests and scripts used for testing simulator itself are provided in ns-3 and can also be packaged.

No special hardware or software is required; testing is handled by ns-3's test.py script that builds tests and executes them.

User Experience

Researchers, teachers and students will be able to install ns-3 much easier.

Dependencies

Definitly needed:

Not needed but will package since it's easy to do:

Possibly useful in the future/would be cool to have:

Contingency Plan

Release without ns-3 included.

Documentation

Release Notes

ns-3 is a discrete-event network simulator for Internet systems, targeted primarily for research and educational use. ns-3 is now included in Fedora. This makes it easier for researchers, teachers and students in field of computer networks to install it and use it.

Comments and Discussion