From Fedora Project Wiki

No edit summary
No edit summary
Line 63: Line 63:

After reboot check if you have /dev/rfcomm0 device with:
After reboot check if you have /dev/rfcomm0 device with:

Revision as of 19:42, 29 November 2008

Fedora Bluetooth GPS How To
In this HowTo you will learn how to connect external bluetooth GPS dongle and make it work on Fedora.

If you have bluetooth GPS dongle that you have laying around, or can borrow one from somebody, and would use GPS on Fedora laptop while you are driving a bike or a car around then this is the guide for you.

Very Important
You need to have bluetooth wireless chip installed in your laptop or a bluetooth USB dongle. If you have a laptop or a desktop without bluetooth built it you should buy a USB bluetooth dongle.

You can check with hcitool command that you have bluetooth device and that it is working correctly :

hcitool dev

Then let’s make sure you have bluetooth service running:

service bluetooth status

if it is not running just start it with:

service bluetooth start

Turn on your bluetooth GPS dongle and find its bluetooth mac address with hcitool command:

hcitool scan
Scanning …
00:1E:EE:00:11:22 LG KU990
00:02:78:99:FF:00 SJ GPS
00:12:EE:55:00:FF Device01

If you find more than one bluetooth device you should know the name of your GPS dongle. My GPS dongle has a “GPS” in its name so it is easy to spot its mac address: 00:02:78:99:FF:00 (SJ GPS)

You need to install gpsd and setup bluetooth config files, so let’s first install gpsd:

su -
yum install gpsd gpsd-clients -y

Then you need to edit bluetooth config file so that gpsd connects automatically to GPS bluetooth dongle.

gedit -etc/bluetooth/rfcomm.conf

and add these lines:

rfcomm0 {
# Automatically bind the device at startup
bind yes;

# Bluetooth address of the device
device 00:12:EE:55:00:FF;

# RFCOMM channel for the connection
channel 1;

# Description of the connection
comment “GPS Bluetooth dongle”;

After reboot check if you have /dev/rfcomm0 device with:

ls -al /dev/rfcomm0

If after reboot (or you don’t wan’t to reboot) you still don’t have /dev/rfcomm0 then just issue this command:

rfcomm bind rfcomm0

Now start gpsd daemon:

gpsd /dev/rfcomm0

Now you can start having fun! :)

Install gps applications like tangogps, gpsdrive and gpsbabel:

yum install tangogps gpsdrive gpsbabel