From Fedora Project Wiki
(added route cmd) |
(Added netcat tests) |
||
| Line 2: | Line 2: | ||
|description=This test case tests the compatibility of various commands with IPv6. | |description=This test case tests the compatibility of various commands with IPv6. | ||
|setup= | |setup= | ||
# Ensure the {{package|iputils}}, {{package|net-tools}}, {{package|bind-utils}}, {{package|iproute}} packages are installed. | # Ensure the {{package|iputils}}, {{package|net-tools}}, {{package|bind-utils}}, {{package|iproute}}, {{package|nc}} packages are installed. | ||
|actions= | |actions= | ||
# Check if you have received an IPv6 address: {{command| ifconfig | grep inet6}} | # Check if you have received an IPv6 address: {{command| ifconfig | grep inet6}} | ||
| Line 9: | Line 9: | ||
# Print the route packets trace to an IPv6 network host {{command| traceroute6 IPV6_ADDR}} | # Print the route packets trace to an IPv6 network host {{command| traceroute6 IPV6_ADDR}} | ||
# Display IPv6 routes table: {{command| ip -6 route}} or {{command| route -A inet6 }} | # Display IPv6 routes table: {{command| ip -6 route}} or {{command| route -A inet6 }} | ||
# Use nc (netcat) on IPv6 network: | |||
## Listen to port 8080 on IPv6 address: {{command| nc -l -6 IPV6_ADDR 8080}} | |||
## Connect to IPv6 address listening to port 8080: {{command| nc -6 IPV6_ADDR 8080}} | |||
|results= | |results= | ||
Revision as of 20:10, 6 June 2011
Description
This test case tests the compatibility of various commands with IPv6.
Setup
- Ensure the
iputils
How to test
- Check if you have received an IPv6 address:
ifconfig | grep inet6 - Check if your DNS response to AAAA requests (IPv6 address):
dig ipv6.DOMAIN.TLD AAAA - Ping a host with IPv6 address:
ping6 IPV6_ADDR - Print the route packets trace to an IPv6 network host
traceroute6 IPV6_ADDR - Display IPv6 routes table:
ip -6 routeorroute -A inet6 - Use nc (netcat) on IPv6 network:
- Listen to port 8080 on IPv6 address:
nc -l -6 IPV6_ADDR 8080 - Connect to IPv6 address listening to port 8080:
nc -6 IPV6_ADDR 8080
- Listen to port 8080 on IPv6 address:
Expected Results
- The commands should work as with ipv4.