From Fedora Project Wiki

No edit summary
(New section: New webcam)
 
Line 36: Line 36:


That webcam is not an other webcam, its one of the cams I'm testing with myself and it should work fine, if you want to test it yourself, install the latest kernel from rawhide and install libv4l from rawhide. Then on the cmdline do: "export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so" (make that /usr/lib64 for 64 bit systems) and from the same terminal run a webcam application like ekiga or cheese, your cam now should work.
That webcam is not an other webcam, its one of the cams I'm testing with myself and it should work fine, if you want to test it yourself, install the latest kernel from rawhide and install libv4l from rawhide. Then on the cmdline do: "export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so" (make that /usr/lib64 for 64 bit systems) and from the same terminal run a webcam application like ekiga or cheese, your cam now should work.
== New webcam ==
Even using the compat trick mentioned previously, I couldn't get this camera to work:
Bus 002 Device 002: ID 093a:2620 Pixart Imaging, Inc.

Latest revision as of 02:57, 16 September 2008

Incomplete Items For Feature Acceptance (2008-07-08)

Please update the following items and change the category of this page to CategoryProposedFedora10 once they are completed. The feature wrangler's have a watch on this page and will see your changes.

  1. Please update the test plan section with information on the webcams that you have so this will give others an idea of which webcams have been tested or will be tested--this might also be useful in the release notes section to call out specific webcams that work with Fedora or were tested for a given release
  2. Please complete the documentation section
  3. Please complete the release notes section with your proposed text.

All done (2008-07-26)

All above requests have been done.

Other Webcams

I have acquired a non-working webcam [F9]: Logitech QuickCam Go [win driver cd Quickcam 9.5 (2006)] At plug:

kernel: hub 1-0:1.0: unable to enumerate USB device on port 3
kernel: usb 3-1: new full speed USB device using ohci_hcd and address 3
kernel: usb 3-1: configuration #1 chosen from 1 choice
kernel: usb 3-1: New USB device found, idVendor=046d, idProduct=092f
kernel: usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kernel: usb 3-1: Product: Camera
kernel: usb 3-1: Manufacturer:  

# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 046d:092f Logitech, Inc. QuickCam Express Plus
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

What can I do to test the improved code / does it apply to this model ?

Reply to other webcams (2008-08-07)

That webcam is not an other webcam, its one of the cams I'm testing with myself and it should work fine, if you want to test it yourself, install the latest kernel from rawhide and install libv4l from rawhide. Then on the cmdline do: "export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so" (make that /usr/lib64 for 64 bit systems) and from the same terminal run a webcam application like ekiga or cheese, your cam now should work.

New webcam

Even using the compat trick mentioned previously, I couldn't get this camera to work:

Bus 002 Device 002: ID 093a:2620 Pixart Imaging, Inc.