From Fedora Project Wiki

(New section: Other Webcams)
No edit summary
Line 16: Line 16:
Logitech QuickCam Go [win driver cd Quickcam 9.5 (2006)]
Logitech QuickCam Go [win driver cd Quickcam 9.5 (2006)]
At plug:
At plug:
<pre>
kernel: hub 1-0:1.0: unable to enumerate USB device on port 3
kernel: hub 1-0:1.0: unable to enumerate USB device on port 3
kernel: usb 3-1: new full speed USB device using ohci_hcd and address 3
kernel: usb 3-1: new full speed USB device using ohci_hcd and address 3
Line 23: Line 24:
kernel: usb 3-1: Product: Camera
kernel: usb 3-1: Product: Camera
kernel: usb 3-1: Manufacturer:   
kernel: usb 3-1: Manufacturer:   
=====
 
# lsusb
# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Line 29: Line 30:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 
</pre>
What can I do to test the improved code / does it apply to this model ?
What can I do to test the improved code / does it apply to this model ?

Revision as of 14:48, 31 July 2008

Incomplete Items For Feature Acceptance (2008-07-08)

Please update the following items and change the category of this page to CategoryProposedFedora10 once they are completed. The feature wrangler's have a watch on this page and will see your changes.

  1. Please update the test plan section with information on the webcams that you have so this will give others an idea of which webcams have been tested or will be tested--this might also be useful in the release notes section to call out specific webcams that work with Fedora or were tested for a given release
  2. Please complete the documentation section
  3. Please complete the release notes section with your proposed text.

All done (2008-07-26)

All above requests have been done.

Other Webcams

I have acquired a non-working webcam [F9]: Logitech QuickCam Go [win driver cd Quickcam 9.5 (2006)] At plug:

kernel: hub 1-0:1.0: unable to enumerate USB device on port 3
kernel: usb 3-1: new full speed USB device using ohci_hcd and address 3
kernel: usb 3-1: configuration #1 chosen from 1 choice
kernel: usb 3-1: New USB device found, idVendor=046d, idProduct=092f
kernel: usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kernel: usb 3-1: Product: Camera
kernel: usb 3-1: Manufacturer:  

# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 046d:092f Logitech, Inc. QuickCam Express Plus
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

What can I do to test the improved code / does it apply to this model ?