Editing Test Day:2013-10-22 Graphics Intel

! [[QA:Testcase_intelvideo_basic|Boot]]

! [[QA:Testcase_intelvideo_vt|Virtual terminal]]

! [[QA:Testcase_intelvideo_restartx|X restart]]

! [[QA:Testcase_intelvideo_glx|GLX]]

! [[QA:Testcase_intelvideo_3D_mesa-demos|Mesa demos]]

! [[QA:Testcase_intelvideo_suspend|Suspend]]

| {{result|pass}}  <ref group="long">Before the boot logo appeared, a white screen was displayed for a short period of time. Once the logo has been fully loaded, the screen blinked once.</ref>

| {{result|pass}}  <ref group="long">I launched all of the specified demos together and viewed them running correctly both in normal operation and via the overview.

| {{result|pass}}  <ref group="long">keep CTRL+ALT pressed constantly during the test

| {{result|warn}}  <ref group="long">Almost all test worked fine.

| {{result|warn}}  <ref group="long">first try failed -> no mouse pointer and graphical artefacts (e.g. blue rectangle in hot corner or sometimes white desktop background for a few seconds).

| {{result|warn||1020078}}<ref>internal wifi is gone, system don't reboot and don't shut down. NM shows only proxy (internal eth is also gone).</ref>

| {{result|pass}}  <ref group="long">Earlier I was having problems with the backlight level not returning to the proper level after resuming from suspend, but now I can't reproduce the issue</ref>

! [[QA:Testcase_intelvideo_gnome3|GNOME Shell]]

! [[QA:Testcase_KDE4_Desktop_Effects|KDE 4 desktop effects]]

! [[QA:Testcase_intelvideo_rotate|Screen rotation]]

! [[QA:Testcase_intelvideo_fastuserswitch|User switch]]

! [[QA:Testcase_intelvideo_multihead|Multi-head]]

| {{result|warn}}  <ref group="long">I could not use the mouse on the login screen (only keyboard worked), but I was able to log in successfully to a new user. That user's desktop came up fine. I was able to switch back and forth after that successfully.</ref>

| {{result|warn}}  <ref group="long">If you arrange the secondary above or below with an offset to the right or left occasionally imposes odd bounds for where a window can be placed on the secondary monitor.</ref>

| {{result|fail}}  <ref group="long">Dualhead (laptop off, 2x extra LCD) is broken. After log in, one screen has artifacts, second does not. After changing relative position of screens, both are broken.</ref>

| {{result|warn||1021945}}

| {{result|warn}}  <ref group="long">If external display (VGA1) is arranged to be above built-in display (LVDS1) then I was not able to move windows into VGA1.

| {{result|warn}}  <ref group="long">first try - on switching screen and on second desktop after switching is missing mouse pointer, only keyboard works. Second try - everything works ok.</ref>

| {{result|pass}}  <ref group="long">Everything worked, except for the fact that I was not able to run two DisplayPort monitors (connected to the docking station) at the same time as the built-in display.  I'm assuming this is a built-in limitation of the hardware, and not an error.</ref>

| {{result|warn||1021945}}{{result|warn}}  <ref>[https://bugzilla.gnome.org/show_bug.cgi?id=710610 GNOME #710610]</ref>

! [[QA:Testcase_intelvideo_xv|Xv]]

! [[QA:Testcase_intelvideo_3D_pymol|PyMOL]]

! [[QA:Testcase_intelvideo_3D_Stellarium|Stellarium]]

! [[QA:Testcase_intelvideo_3D_SuperTuxKart|SuperTuxKart]]

! [[QA:Testcase_intelvideo_3D_Xonotic|Xonotic]]

! [[QA:Testcase_intelvideo_3D_VDrift|VDrift]]

| {{result|warn}}  <ref group="long">In "Representations" demo mesh was good during the starting animation, but afterwards is was blinking. Not much was visible of it, mostly some blue line segments.</ref>

| {{result|warn}}  <ref group="long">Texture size "medium" and above causes a displaying problem that reflecting areas (usually triangles) appear on the track instead of the correct texture e.g. on the road, the gravel next o the track</ref>{{result|warn}}  <ref group="long">Native resolution + full screen. With a subset of graphics settings some textures were replaced with reflecting or transparent triangles e.g. pieces of road at the start line. I couldn't find the smallest subset of settings, but probably "shader" must set to true.</ref>

! [[QA:Testcase_intelvideo_3D_Steam|Steam]]

! [[QA:Testcase_intelvideo_webgl|WebGL]]

| {{result|fail}}  <ref group="long">Switching to discrete card results in black screen. However system is still responsive, if blindly switch to Intel GPU bash in virtual terminal will be present.</ref>

| {{result|fail}}  <ref group="long">After relogin I got black screen. I pressed Ctrl+Alt+F2 and typed in console "systemctl stop display-manager.service". It killed system at all.