Editing Test Results:Fedora 13 Final TC1 Install

{{admon/important|No longer current|This candidate is no longer the current milestone.  For the latest results, see [[Test_Results:Current_Installation_Test]].}}

This page is intended to record [[QA:Fedora_13_Install_Test_Plan]] test results for the '''Final TC1''' milestone.

= Instructions =

This page tracks test results against the Fedora 13 '''Final TC1''' build.  Test results against other Fedora 13 milestones can be found at [[:Category:Fedora_13_Test_Results]].

== What To Test ==

* Tests requiring ''physical media'' (e.g. DVD or CD images) -- [http://serverbeach1.fedoraproject.org/pub/alt/stage/13.TC1/  download the required ISO images].
* Unless otherwise noted, you may use nightly Fedora 13 ''branch'' install images.  [[Releases/Branched|Review for information on downloading and installing Branched]].
* For testers with limited bandwidth, ''deltaiso'' images are available.  For more information on creating or using delta ISOs, please refer to [[Delta_ISOs]].

{{admon/tip|Save bandwidth|If you already downloaded previous ''physical media'' ISO images, you can save time by [http://lists.fedoraproject.org/pipermail/test/2010-April/090522.html downloading delta ISO images].}}

== Who's available ==

The following cast of characters will be available testing, workarounds, bug fixes, general discussion ...
* IRC: [irc://irc.freenode.net/fedora-qa #fedora-qa] on irc.freenode.net
* Quality Assurance - [[User:jlaska]] , [[User:Rhe]], [[User:Liam]], [[User:Robatino]]

== Add or Remove a Test Case ==

# Please request review for your changes by publishing your test case for review to [https://admin.fedoraproject.org/mailman/listinfo/test test list].
# Once reviewed, make your changes to this document
# Finally, update [[QA:Fedora_13_Install_Results_Template]] with the same changes.

== Post Test Results  ==

Want to share information about something you tested?  Please click ''edit'' to add test results.  All test results are posted using the format specified [[Template:Result]].

== Key ==

See the table below for a sample format for test results.

{| class="wikitable sortable" border="0"
! Test Result !! Explanation
|-
| {{result|none}} 
| ''Untested'' - This test has not been run, and is available for anyone to contribute feedback.
|-
| {{result|pass|liam}} 
| ''Passed'' - The test has been run and the tester determine the test met the ''expected results''
|-
| {{result|inprogress|adamwill}} 
| ''Inprogress'' - An inprogress result is often used for tests that take a long time to execute.  Inprogress results should be temporary and change to pass, fail or warn.
|-
| {{result|fail|jlaska|XYZ|ZXY}} 
| ''Failed'' - Indicates a failed test.  A link to a bug must be provided.  See [[Template:Result]] for details on providing bug information. <references/>
|-
| {{result|warn|rhe}} <ref>Brief description about the warning status</ref>
| ''Warning'' - This test completed and met the ''expected results'' of the test, but other issues were encountered during testing that warrant attention.<references/>
|-
| {{result|pass|rhe}} {{result|warn|kparal}}
| ''Multiple results'' - More people can easily provide results to a single test case.
|-
| style="background:lightgrey;"| {{testresult/none}} {{result|none}} 
| ''Unsupported'' - An unsupported test or configuration.  No testing is required.
|-
|}

== Priority ==

The explanation of test case priority is available at [[QA:Fedora_13_Install_Test_Plan#Test_Priority]].

= '''Test Matrix''' =

{| class="wikitable sortable" border="1"
! Priority !! Test Area !! Test Case !! i386 !! x86_64 !! References
|-
| Alpha
| Image Sanity
| [[QA:Testcase_Mediakit_ISO_Size]]
| {{result|pass|robatino}} <ref name="oversized">live and netinst images are larger than ISO header indicates, see https://bugzilla.redhat.com/show_bug.cgi?id=585006</ref> {{result|pass|kparal}}
| {{result|pass|robatino}} <ref name="oversized"/> {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Image Sanity
| [[QA:Testcase_Mediakit_ISO_Checksums]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Image Sanity
| [[QA:Testcase_Mediakit_Repoclosure]]
| {{result|pass|robatino}}
| {{result|pass|jlaska}} {{result|pass|robatino}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Image Sanity
| [[QA:Testcase_Mediakit_FileConflicts]]
| {{result|pass|jlaska}} {{result|pass|robatino}}
| {{result|pass|jlaska}} {{result|pass|robatino}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Boot Methods
| [[QA/TestCases/BootMethodsBootIso]]
| {{result|fail|liam}}<ref>see {{bz|572799}}, X failed to start during install </ref>{{result|pass|robatino|588357}}<ref>works using VirtualBox, Memory test option is missing from "Welcome to Fedora 13!" menu screen</ref>
| {{result|pass|robatino}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Boot Methods
| [[QA/TestCases/BootMethodsDvd]]
| {{result|pass|robatino|588357}}<ref>Memory test option is missing from "Welcome to Fedora 13!" menu screen</ref>
| {{result|pass|robatino}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Boot Methods
| [[QA/TestCases/BootMethodsPxeboot]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Install Source
| [[QA/TestCases/InstallSourceHttp]]
| {{result|pass|liam}} {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Install Source
| [[QA/TestCases/InstallSourceDvd]]
| {{result|pass|jlaska}}
| {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Install Source
| [[QA/TestCases/InstallSourceFtpAnonymous]]
| {{result|pass|liam}}
| {{result|pass|liam}}
| <references/>
|-
| Alpha
| Install Source
| [[QA:TestCases/Install Source Live Image]]
| {{result|pass|robatino}}
| {{result|warn|jlaska}} <ref>{{bz|587637}} - udevd[430]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/90-alsa-tools-firmware.rules</ref> {{result|fail|jlaska}} <ref>{{bz|587639}}  - Remove "Thank you for downloading pre-release" dialog</ref> {{result|pass|kparal}}{{result|pass|robatino}}
| <references/>
|-
| Alpha
| Kickstart Delivery
| [[QA/TestCases/KickstartKsHttpServerKsCfg]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Package Set
| [[QA/TestCases/PackageSetsDefaultPackageInstall]]
| {{result|pass|robatino}}<ref name="touch">when installing ModemManager (which happens before coreutils), "/var/tmp/rpm-tmp.UjzpBx: line 2: touch: command not found"</ref><ref name="warning">WARNING: Failed to parse default value `' for schema (/schemas/desktop/gnome/peripherals/keyboard/indicator/fontSize)</ref><ref name="setroubleshoot">after installing setroubleshoot, some harmless-looking deprecation warnings</ref><ref>http://pastebin.com/aw1TwPDs</ref>
| {{result|pass|robatino}}<ref name="touch"/><ref>after installing prelink, "No such file or directory"</ref><ref name="warning"/><ref name="setroubleshoot"/><ref>http://pastebin.com/s6fqfzGw</ref>
| <references/>
|-
| Alpha
| Package Set
| [[QA/TestCases/PackageSetsMinimalPackageInstall]]
| {{result|pass|robatino}}
| {{result|pass|robatino}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Partitioning
| [[QA/TestCases/PartitioningUninitializedDisks]]
| {{result|pass|robatino}}
| {{result|pass|robatino}} {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Partitioning
| [[QA:Testcase_Anaconda_autopart_install]]
| {{result|pass|robatino}}
| {{result|pass|robatino}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| Partitioning
| [[QA:Testcase_Anaconda_autopart_(encrypted)_install]]
| {{result|pass|jlaska}} 
| {{result|pass|jlaska}} {{result|warn|kparal|588303}}
| <references/>
|-
| Alpha
| Partitioning
| [[QA:Testcase_Anaconda_autopart_(shrink)_install]]
| {{result|pass|jlaska}} 
| {{result|pass|jlaska}} 
| <references/>
|-
| Alpha
| Partitioning
| [[QA:Testcase_Anaconda_autopart_(use_free_space)_install]]
| {{result|pass|jlaska}} 
| {{result|none}}
| <references/>
|-
| Alpha
| Partitioning
| [[QA/TestCases/PartitioningExt4OnNativeDevice]]
| {{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| Alpha
| Repository
| [[QA:Testcase Additional CDDVD Repository]]
| {{result|pass|liam}}
| {{result|pass|liam}}
| <references/>
|-
| Alpha
| Repository
| [[QA:Testcase Additional Ftp Repository]]
| {{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| {{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| <references/>
|-
| Alpha
| Repository
| [[QA:Testcase Additional Http Repository]]
| {{result|pass|jlaska}}{{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| {{result|pass|jlaska}}{{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| <references/>
|-
| Alpha
| Repository
| [[QA:Testcase Additional Mirrorlist Repository]]
| {{result|pass|jlaska}} {{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| {{result|pass|jlaska}} {{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| <references/>
|-
| Alpha
| Recovery
| [[QA:Testcase_Anaconda_rescue_mode]]
| {{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| Alpha
| Recovery
| [[QA:Testcase_Anaconda_updates.img_via_URL]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Recovery
| [[QA:Testcase Anaconda save traceback to remote system]]
| {{result|pass|liam}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Recovery
| [[QA:Testcase Anaconda save traceback to bugzilla]]
| {{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| Alpha
| Recovery
| [[QA:Testcase Anaconda save traceback to disk]]
| {{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| Alpha
| Storage Devices
| [[QA:Testcase_install_to_SATA_device]]
| {{result|none}}
| {{result|none}}
| <references/>
|-
| Alpha
| Storage Devices
| [[QA:Testcase_install_to_SCSI_device]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| Storage Devices
| [[QA:Testcase_install_to_PATA_device]]
| {{result|none}}
| {{result|pass|jlaska}} <ref>used KVM IDE device</ref>
| <references/>
|-
| Alpha
| User Interface
| [[QA:Testcase_Anaconda_User_Interface_Graphical]]
| {{result|pass|robatino}}
| {{result|pass|robatino}} {{result|pass|jlaska}} {{result|pass|kparal}}
| <references/>
|-
| Alpha
| User Interface
| [[QA:Testcase_Anaconda_User_Interface_Text]]
| {{result|pass|liam}}{{result|pass|robatino}}<ref>DVD install works on VirtualBox</ref>
| {{result|pass|robatino}}
| <references/>
|-
| Alpha
| User Interface
| [[QA:Testcase_Anaconda_User_Interface_VNC]]
| {{result|pass|liam}}
| {{result|pass|robatino}}
| <references/>
|-
| Alpha
| User Interface
| [[QA:Testcase_Anaconda_User_Interface_Cmdline]]
| {{result|pass|liam}}
| {{result|pass|jlaska}}
| <references/>
|-
| Alpha
| User Interface
| [[QA:Testcase_Anaconda_User_Interface_serial_console]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Boot Methods
| [[QA/TestCases/BootMethodsCdrom]]
| {{result|pass|robatino|588357}}<ref>Memory test option is missing from "Welcome to Fedora 13!" menu screen</ref>
| {{result|pass|robatino}}
| <references/>
|-
| Beta
| Boot Methods
| [[QA/TestCases/BootMethodsXenParaVirt]]
| {{result|none}}
| {{result|none}}
| <references/>
|-
| Beta
| Boot Methods
| [[QA/TestCases/BootMethodsKVM]]
| {{result|pass|liam}}
| {{result|pass|jlaska}} {{result|pass|kparal}}
| <references/>
|-
| Beta
| Boot Methods
| [[QA:Testcase_Boot_Methods_efidisk.img]]
| {{result|fail|pjones}} <ref name="589680">{{bz|589680}} - UEFI boot images are not being created correctly </ref>
| {{result|fail|pjones}} <ref name="589680"/>
| <references/>
|-
| Beta
| Install Source
| [[QA/TestCases/InstallSourceNfs]]
| {{result|pass|liam}}
| {{result|pass|jlaska}} {{result|pass|kparal}}
| <references/>
|-
| Beta
| Install Source
| [[QA/TestCases/InstallSourceCdrom]]
| {{result|pass|liam}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Install Source
| [[QA/TestCases/InstallSourceFtpNonAnonymous]]
| {{result|pass|liam}}
| {{result|pass|liam}}
| <references/>
|-
| Beta
| Kickstart Delivery
| [[QA/TestCases/KickstartKsFilePathKsCfg]]
| {{result|pass|jlaska}}
| {{result|none}}
| <references/>
|-
| Beta
| Kickstart Delivery
| [[QA/TestCases/KickstartKsHdDevicePathKsCfg]]
| {{result|pass|liam}}
| {{result|pass|liam}}
| <references/>
|-
| Beta
| Kickstart Delivery
| [[QA/TestCases/KickstartKsNfsServerPathKsCfg]]
| {{result|pass|liam}}
| {{result|pass|liam}}
| <references/>
|-
| Beta
| Partitioning
| [[QA/TestCases/PartitioningRootfsOnRaid1]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Partitioning
| [[QA/TestCases/PartitioningRaid0OnLvmDevice]]
| {{result|none}}
| {{result|none}}
| <references/>
|-
| Beta
| Partitioning
| [[QA/TestCases/PartitioningUsrOnRaid0]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Partitioning
| [[QA/TestCases/PartitioningUsrOnRaid5]]
| {{result|warn|jlaska}} <ref name="587665">{{bz|587665}} - Generated anaconda-ks.cfg contains None values in partition keywords</ref>
| {{result|warn|jlaska}} <ref name="587665" />
| <references/>
|-
| Beta
| Partitioning
| [[QA/TestCases/PartitioningUsrOnRaid6]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Repository
| [[QA:Testcase Additional NFS Repository]]
| {{result|fail|liam}}<ref>see {{bz|577803}}, it was fixed ,but did not push to this version</ref>
| {{result|pass|kparal}}
| <references/>
|-
| Beta
| Recovery
| [[QA:Testcase_Anaconda_updates.img_via_installation_source]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Recovery
| [[QA:Testcase_Anaconda_updates.img_via_local_media]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Storage Devices
| [[QA:Testcase_Anaconda_partitioning_dmraid_rootfs]]
| {{result|pass|jlaska}} <ref name="nvidia">NVidia BIOS RAID adapter</ref>
| {{result|pass|jlaska}} <ref name="nvidia"/>
| <references/>
|-
| Beta
| Upgrade system
| [[QA:Testcase_Anaconda_Upgrade_New_Bootloader]]
| {{result|pass|liam}}
| {{result|pass|kparal}}
| <references/>
|-
| Beta
| Upgrade system
| [[QA:Testcase_Anaconda_Upgrade_Skip_Bootloader]]
| {{result|pass|liam}}
| {{result|none}}
| <references/>
|-
| Beta
| Upgrade system
| [[QA:Testcase_Anaconda_Upgrade_Update_Bootloader]]
| {{result|pass|liam}}
| {{result|pass|kparal}}
| <references/>
|-
| Beta
| Upgrade system
| [[QA:Testcase_Anaconda_Upgrade_Encrypted_Root]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Beta
| Upgrade system
| [[QA:Testcase_Preupgrade]]
| {{result|fail|jlaska}} <ref>See [[Test_Day:2010-04-29_Preupgrade]]</ref>
| {{result|fail|jlaska}} <ref>See [[Test_Day:2010-04-29_Preupgrade]]</ref>
| <references/>
|-
| Beta
| Upgrade system
| [[QA:Testcase_Preupgrade_low_/boot_disk_space_to_install]]
| {{result|fail|jlaska}} <ref>See [[Test_Day:2010-04-29_Preupgrade]]</ref>
| {{result|fail|jlaska}} <ref>See [[Test_Day:2010-04-29_Preupgrade]]</ref>
| <references/>
|-
| Final
| Install Source
| [[QA/TestCases/InstallSourceNfsIso]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}}
| <references/>
|-
| Final
| Install Source
| [[QA/TestCases/InstallSourceHardDrive]]
| {{result|pass|jlaska}}
| {{result|pass|jlaska}} {{result|warn|jlaska}} <ref>{{bz|588485}} - AttributeError: 'NoneType' object has no attribute 'format'</ref>
| <references/>
|-
| Final
| Partitioning
| [[QA/TestCases/PartitioningExt3OnNativeDevice]]
| {{result|pass|jlaska}}{{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| Final
| Partitioning
| [[QA/TestCases/PartitioningExt2OnNativeDevice]]
| {{result|pass|jlaska}}{{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| Final
| Partitioning
| [[QA/TestCases/PartitioningNoSwap]]
| {{result|pass|jlaska}}
| {{result|warn|jlaska}} <ref>OOMKILL on a 768M x86_64 virt guest doing a no-swap install</ref>
| <references/>
|-
| Final
| Storage Devices
| [[QA:Testcase_Anaconda_ISCSI_No_Authentication]]
| {{result|warn|jlaska}} <ref name="iscsiroot">{{bz|589250}} - iSCSI root install+boot fails in Fedora 13. Latest iscsi-initiator-utils required.  Works fine when not using iSCSI as root device</ref>
| {{result|warn|jlaska}} <ref name="iscsiroot"/> {{result|warn|jlaska}} <ref>{{bz|588493}} - Unable to select local BIOS RAID drive as boot drive</ref> <ref>{{bz|588498}} - Backtrace in clearpart_gui when only uninitialized disks are found</ref>
| <references/>
|-
| Final
| Recovery
| [[QA:Testcase Anaconda traceback debug mode]]
| {{result|pass|robatino}}
| {{result|pass|robatino}} {{result|warn|jlaska}} <ref>{{bz|497418}} - Traceback debug mode doesn't honor console=ttyS0</ref>
| <references/>
|-
| Final
| User Interface
| [[QA:Testcase_Anaconda_User_Interface_Telnet]]
| {{result|pass|robatino}}
| {{result|pass|robatino}}
| <references/>
|-
| <!-- Tier2 -->
| Upgrade system
| [[QA:Testcase_Preupgrade_from_older_release]]
| {{result|fail|jlaska}} <ref>See [[Test_Day:2010-04-29_Preupgrade]]</ref>
| {{result|fail|jlaska}} <ref>See [[Test_Day:2010-04-29_Preupgrade]]</ref>
| <references/>
|-
|}

[[Category:Fedora 13 Test Results]]
[[Category:Fedora 13 Final Test Results|I]]