(9 intermediate revisions by 3 users not shown) | |||
Line 7: | Line 7: | ||
This document refers to packaging for Fedora 12 onwards. If you are packaging for an older release of Fedora, please see: [[Packaging:Emacs_Old]] | This document refers to packaging for Fedora 12 onwards. If you are packaging for an older release of Fedora, please see: [[Packaging:Emacs_Old]] | ||
== | == Important notes on these Guidelines == | ||
The | The guidelines in the following sections make extensive use of the macros defined in /etc/rpm/macros.emacs and /etc/rpm/macros.xemacs which are installed with the emacs-common and xemacs-common packages. | ||
There are two distinct cases where consideration of these guidelines is required: | There are two distinct cases where consideration of these guidelines is required: | ||
# This case refers to the situation where a package's principal purpose is to provide extra functionality for (X)Emacs, and the package serves no purpose without the presence of (X)Emacs. An example of this case is the VM mail reader, as packaged in emacs-vm. | |||
# This case refers to the situation where a package's principal functionality does not require (X)Emacs, but the package also includes some auxiliary Elisp files to provide support for the package in (X)Emacs. | |||
Each of these cases is handled differently, and below you will find a section outlining the Guidelines for each case. | |||
== Case I: Package only provides functionality for (X)Emacs == | |||
=== Package naming and sub-package organization === | |||
1. Where an add-on package foo is for both GNU Emacs and XEmacs, the main package should be called emacs-common-foo. This main package should contain files common to both GNU Emacs and XEmacs such as documentation etc. Files specific to each of GNU Emacs and XEmacs should be placed in sub-packages as detailed in points 3 and 4 below. | |||
1. Where an add-on package foo is for both GNU Emacs and XEmacs, the main package should be called emacs-common-foo. This main package should contain files common to both GNU Emacs and XEmacs such as documentation etc. Files specific to each of GNU Emacs and XEmacs should be placed in sub-packages as detailed in points 4 | |||
2. Where a package is specific only to one flavour of (X)Emacs, the main package should be called emacs-foo or xemacs-foo. In both cases, elisp source should be packaged in separate sub-packages as detailed below. | 2. Where a package is specific only to one flavour of (X)Emacs, the main package should be called emacs-foo or xemacs-foo. In both cases, elisp source should be packaged in separate sub-packages as detailed below. | ||
Line 33: | Line 32: | ||
* xemacs-foo-el: this sub-package contains the source elisp files used to build the add-on package for XEmacs. Files in this package should not be required to use the add-on package. | * xemacs-foo-el: this sub-package contains the source elisp files used to build the add-on package for XEmacs. Files in this package should not be required to use the add-on package. | ||
=== File locations === | |||
1. File locations for GNU Emacs add-on packages: | 1. File locations for GNU Emacs add-on packages: | ||
* All elisp and related files for the package should be installed in the directory %{_emacs_sitelispdir}/foo. | * All elisp and related files for the package should be installed in the directory %{_emacs_sitelispdir}/foo. | ||
Line 43: | Line 42: | ||
* If the package requires a startup file this should be called foo-init.el and be placed in %{_xemacs_sitestartdir}. | * If the package requires a startup file this should be called foo-init.el and be placed in %{_xemacs_sitestartdir}. | ||
=== Directory ownership === | |||
1. Directory ownerships for GNU Emacs add-on packages: | 1. Directory ownerships for GNU Emacs add-on packages: | ||
* %{_emacs_sitelispdir}/foo should be owned by the package emacs-foo. | * %{_emacs_sitelispdir}/foo should be owned by the package emacs-foo. | ||
Line 51: | Line 50: | ||
* Any %{_xemacs_sitepkgdir}/*/foo directories should be owned by xemacs-foo. | * Any %{_xemacs_sitepkgdir}/*/foo directories should be owned by xemacs-foo. | ||
=== Package Requires === | |||
1. Package Requires for GNU Emacs add-on packages | 1. Package Requires for GNU Emacs add-on packages | ||
* emacs-foo-el must have Requires: emacs-foo = %{version}-%{release}. | * emacs-foo-el must have Requires: emacs-foo = %{version}-%{release}. | ||
Line 62: | Line 61: | ||
* xemacs-foo must have Requires: xemacs(bin) >= %{_xemacs_version} | * xemacs-foo must have Requires: xemacs(bin) >= %{_xemacs_version} | ||
=== Package BuildRequires === | |||
1. Package BuildRequires for GNU Emacs add-on packages: | 1. Package BuildRequires for GNU Emacs add-on packages: | ||
* In general it should suffice to have BuildRequires: emacs | * In general it should suffice to have BuildRequires: emacs | ||
Line 70: | Line 69: | ||
* It may be necessary to also add BuildRequires: xemacs-devel in rare circumstances | * It may be necessary to also add BuildRequires: xemacs-devel in rare circumstances | ||
=== Manual byte compilation === | |||
Usually package Elisp compilation is handled via a make file shipped with the package, but on some occasions it may be necessary to add commands to the %build section of the spec file to byte compile files. The following macros are provided to help with this | Usually package Elisp compilation is handled via a make file shipped with the package, but on some occasions it may be necessary to add commands to the %build section of the spec file to byte compile files. The following macros are provided to help with this: | ||
* For GNU Emacs byte compilation, use %{_emacs_bytecompile} file.el | |||
* For XEmacs byte compilation, use %{_xemacs_bytecompile} file.el | |||
It is a requirement that all Elisp files are byte compiled and packaged, unless there is a good reason not to, in which case this should be documented with a comment in the spec file. If you are packaging for both GNU Emacs and XEmacs, be sure to byte compile for both. | |||
=== Use of BuildArch: noarch === | |||
If an add-on package requires only byte compilation of elisp then BuildArch: noarch should be used. | If an add-on package requires only byte compilation of elisp then BuildArch: noarch should be used. | ||
== Case II: Package also provides auxiliary (X)Emacs files == | |||
=== Package naming and sub-package organization === | |||
For Case II the compiled Elisp and Elisp source reside in the main package i.e. it is not necessary to create sub-packages for the Elisp files. The package should contain both the byte compiled Elisp and the Elisp source files. | For Case II the compiled Elisp and Elisp source reside in the main package i.e. it is not necessary to create sub-packages for the Elisp files. The package should contain both the byte compiled Elisp and the Elisp source files. | ||
=== File locations === | |||
1. Location of files relating to GNU Emacs: | 1. Location of files relating to GNU Emacs: | ||
* All elisp and related files for the package should be installed in the directory %{_emacs_sitelispdir}/foo. | * All elisp and related files for the package should be installed in the directory %{_emacs_sitelispdir}/foo. | ||
Line 99: | Line 95: | ||
* If the package requires a startup file this should be called foo-init.el and be placed in %{_xemacs_sitestartdir}. | * If the package requires a startup file this should be called foo-init.el and be placed in %{_xemacs_sitestartdir}. | ||
=== Directory ownership === | |||
1. If the package installs files in %{_emacs_sitelispdir}/foo, then it should own that directory | 1. If the package installs files in %{_emacs_sitelispdir}/foo, then it should own that directory | ||
2. If the package installs files in %{_xemacs_sitelispdir}/foo, then it should own that directory | 2. If the package installs files in %{_xemacs_sitelispdir}/foo, then it should own that directory | ||
=== Package Requires === | |||
1. If the package provides files for use with GNU Emacs, it must: | 1. If the package provides files for use with GNU Emacs, it must: | ||
* have Requires: emacs-filesystem >= %{_emacs_version} | * have Requires: emacs-filesystem >= %{_emacs_version} | ||
Line 113: | Line 109: | ||
* NOT have Requires: xemacs(bin) >= %{_xemacs_version} | * NOT have Requires: xemacs(bin) >= %{_xemacs_version} | ||
=== Package BuildRequires === | |||
1. Package BuildRequires for GNU Emacs add-on packages: | 1. Package BuildRequires for GNU Emacs add-on packages: | ||
* In general it should suffice to have BuildRequires: emacs | * In general it should suffice to have BuildRequires: emacs | ||
Line 121: | Line 117: | ||
* It may be necessary to also add BuildRequires: xemacs-devel in rare circumstances | * It may be necessary to also add BuildRequires: xemacs-devel in rare circumstances | ||
=== Manual byte compilation === | |||
Elisp files (other than the startup file) must be byte compiled during the %build section of the spec file. | Elisp files (other than the startup file) must be byte compiled during the %build section of the spec file. | ||
Often, package Elisp compilation is handled via a make file shipped with the package, but on some occasions it may be necessary to add commands to the %build section of the spec file to byte compile files. The following macros are provided to help with this | Often, package Elisp compilation is handled via a make file shipped with the package, but on some occasions it may be necessary to add commands to the %build section of the spec file to byte compile files. The following macros are provided to help with this: | ||
# For GNU Emacs byte compilation, use %{_emacs_bytecompile} file.el | |||
# For XEmacs byte compilation, use %{_xemacs_bytecompile} file.el | |||
It is a requirement that all | It is a requirement that all packaged Elisp files are byte compiled, unless there is a good reason not to, in which case this should be documented with a comment in the spec file. If you are packaging for both GNU Emacs and XEmacs, be sure to byte compile for both. | ||
=== Use of BuildArch: noarch === | |||
If an add-on package requires only byte compilation of elisp then BuildArch: noarch should be used. | If an add-on package requires only byte compilation of elisp then BuildArch: noarch should be used. | ||
== | == Spec file templates for (X)Emacs Case I add-on packages == | ||
=== Template for a package for both GNU Emacs and XEmacs === | === Template for a package for both GNU Emacs and XEmacs === |
Latest revision as of 16:58, 9 March 2011
Packaging of add-ons for GNU Emacs and XEmacs
Purpose
The purpose of this document is to promote good practice in packaging add-ons for GNU Emacs and XEmacs, and to encourage the submission of more Emacs add-on packages to the package collection by providing easy to use spec file templates.
This document refers to packaging for Fedora 12 onwards. If you are packaging for an older release of Fedora, please see: Packaging:Emacs_Old
Important notes on these Guidelines
The guidelines in the following sections make extensive use of the macros defined in /etc/rpm/macros.emacs and /etc/rpm/macros.xemacs which are installed with the emacs-common and xemacs-common packages.
There are two distinct cases where consideration of these guidelines is required:
- This case refers to the situation where a package's principal purpose is to provide extra functionality for (X)Emacs, and the package serves no purpose without the presence of (X)Emacs. An example of this case is the VM mail reader, as packaged in emacs-vm.
- This case refers to the situation where a package's principal functionality does not require (X)Emacs, but the package also includes some auxiliary Elisp files to provide support for the package in (X)Emacs.
Each of these cases is handled differently, and below you will find a section outlining the Guidelines for each case.
Case I: Package only provides functionality for (X)Emacs
Package naming and sub-package organization
1. Where an add-on package foo is for both GNU Emacs and XEmacs, the main package should be called emacs-common-foo. This main package should contain files common to both GNU Emacs and XEmacs such as documentation etc. Files specific to each of GNU Emacs and XEmacs should be placed in sub-packages as detailed in points 3 and 4 below.
2. Where a package is specific only to one flavour of (X)Emacs, the main package should be called emacs-foo or xemacs-foo. In both cases, elisp source should be packaged in separate sub-packages as detailed below.
3. Files specific to GNU Emacs should be placed in two sub-packages:
- emacs-foo: this sub-package should contain compiled elisp and other files needed to use the add-on package with GNU Emacs only. It should not contain any source elisp files which are not required to run the package.
- emacs-foo-el: this sub-package contains the source elisp files used to build the add-on package for GNU Emacs. Files in this package should not be required to use the add-on package.
4. Files specific to XEmacs should be placed in two sub-packages:
- xemacs-foo: this sub-package should contain compiled elisp and other files needed to use the add-on package with XEmacs only. It should not contain any source elisp files which are not required to run the package.
- xemacs-foo-el: this sub-package contains the source elisp files used to build the add-on package for XEmacs. Files in this package should not be required to use the add-on package.
File locations
1. File locations for GNU Emacs add-on packages:
- All elisp and related files for the package should be installed in the directory %{_emacs_sitelispdir}/foo.
- If the package requires a startup file this should be called foo-init.el and be placed in %{_emacs_sitestartdir}.
2. File locations for XEmacs add-on packages:
- All elisp files for package should be installed in the directory %{_xemacs_sitelispdir}/foo (%{_xemacs_sitelispdir} translates to /usr/share/xemacs/site-packages/lisp/)
- All other files for the add-on package should be installed under the relevant sub-directories in %{_xemacs_sitepkgdir} eg. %{_xemacs_sitepkgdir}/etc/foo (%{_xemacs_sitepkgdir} translates to /usr/share/xemacs/site-packages).
- If the package requires a startup file this should be called foo-init.el and be placed in %{_xemacs_sitestartdir}.
Directory ownership
1. Directory ownerships for GNU Emacs add-on packages:
- %{_emacs_sitelispdir}/foo should be owned by the package emacs-foo.
2. Directory ownerships for XEmacs add-on packages:
- %{_xemacs_sitelispdir}/foo should be owned by xemacs-foo.
- Any %{_xemacs_sitepkgdir}/*/foo directories should be owned by xemacs-foo.
Package Requires
1. Package Requires for GNU Emacs add-on packages
- emacs-foo-el must have Requires: emacs-foo = %{version}-%{release}.
- Where relevant emacs-foo must have Requires: emacs-common-foo = %{version}-%{release}
- emacs-foo must have Requires: emacs(bin) >= %{_emacs_version}
2. Package Requires for XEmacs add-on packages
- xemacs-foo-el must have Requires: xemacs-foo = %{version}-%{release}.
- Where relevant xemacs-foo must have Requires: emacs-common-foo = %{version}-%{release}
- xemacs-foo must have Requires: xemacs(bin) >= %{_xemacs_version}
Package BuildRequires
1. Package BuildRequires for GNU Emacs add-on packages:
- In general it should suffice to have BuildRequires: emacs
2. Package BuildRequires for XEmacs add-on packages:
- In general it should suffice to have BuildRequires: xemacs
- It may be necessary to also add BuildRequires: xemacs-devel in rare circumstances
Manual byte compilation
Usually package Elisp compilation is handled via a make file shipped with the package, but on some occasions it may be necessary to add commands to the %build section of the spec file to byte compile files. The following macros are provided to help with this:
- For GNU Emacs byte compilation, use %{_emacs_bytecompile} file.el
- For XEmacs byte compilation, use %{_xemacs_bytecompile} file.el
It is a requirement that all Elisp files are byte compiled and packaged, unless there is a good reason not to, in which case this should be documented with a comment in the spec file. If you are packaging for both GNU Emacs and XEmacs, be sure to byte compile for both.
Use of BuildArch: noarch
If an add-on package requires only byte compilation of elisp then BuildArch: noarch should be used.
Case II: Package also provides auxiliary (X)Emacs files
Package naming and sub-package organization
For Case II the compiled Elisp and Elisp source reside in the main package i.e. it is not necessary to create sub-packages for the Elisp files. The package should contain both the byte compiled Elisp and the Elisp source files.
File locations
1. Location of files relating to GNU Emacs:
- All elisp and related files for the package should be installed in the directory %{_emacs_sitelispdir}/foo.
- If the package requires a startup file this should be called foo-init.el and be placed in %{_emacs_sitestartdir}.
2. Location of files relating to XEmacs:
- All elisp files for package should be installed in the directory %{_xemacs_sitelispdir}/foo (%{_xemacs_sitelispdir} translates to /usr/share/xemacs/site-packages/lisp/)
- All other files for the add-on package should be installed under the relevant sub-directories in %{_xemacs_sitepkgdir} eg. %{_xemacs_sitepkgdir}/etc/foo (%{_xemacs_sitepkgdir} translates to /usr/share/xemacs/site-packages).
- If the package requires a startup file this should be called foo-init.el and be placed in %{_xemacs_sitestartdir}.
Directory ownership
1. If the package installs files in %{_emacs_sitelispdir}/foo, then it should own that directory
2. If the package installs files in %{_xemacs_sitelispdir}/foo, then it should own that directory
Package Requires
1. If the package provides files for use with GNU Emacs, it must:
- have Requires: emacs-filesystem >= %{_emacs_version}
- NOT have Requires: emacs(bin) >= %{_emacs_version}
2. If the package provides files for use with XEmacs, it must:
- have Requires: xemacs-filesystem >= %{_xemacs_version}
- NOT have Requires: xemacs(bin) >= %{_xemacs_version}
Package BuildRequires
1. Package BuildRequires for GNU Emacs add-on packages:
- In general it should suffice to have BuildRequires: emacs
2. Package BuildRequires for XEmacs add-on packages:
- In general it should suffice to have BuildRequires: xemacs
- It may be necessary to also add BuildRequires: xemacs-devel in rare circumstances
Manual byte compilation
Elisp files (other than the startup file) must be byte compiled during the %build section of the spec file.
Often, package Elisp compilation is handled via a make file shipped with the package, but on some occasions it may be necessary to add commands to the %build section of the spec file to byte compile files. The following macros are provided to help with this:
- For GNU Emacs byte compilation, use %{_emacs_bytecompile} file.el
- For XEmacs byte compilation, use %{_xemacs_bytecompile} file.el
It is a requirement that all packaged Elisp files are byte compiled, unless there is a good reason not to, in which case this should be documented with a comment in the spec file. If you are packaging for both GNU Emacs and XEmacs, be sure to byte compile for both.
Use of BuildArch: noarch
If an add-on package requires only byte compilation of elisp then BuildArch: noarch should be used.
Spec file templates for (X)Emacs Case I add-on packages
Template for a package for both GNU Emacs and XEmacs
This spec-file template for the add-on package "foo" creates 5 packages:
1. emacs-common-foo is the main package. This should contain files which are common to both the emacs-foo and xemacs-foo subpackages below. Examples of what this file would contain are the package documentation, the COPYING file, the CHANGELOG file etc.
2. emacs-foo. This sub-package Requires emacs-common-foo and contains the files needed to run foo with Emacs only. This package owns the director /usr/share/emacs/site-lisp/foo.
3. emacs-foo-el. This sub-package contains the elisp source files corresponding to the compiled elisp files in package emacs-foo. This sub-package Requires: emacs-foo, as the directory in which the elisp source files are installed to is owned by emacs-foo.
4. xemacs-foo. This sub-package Requires emacs-common-foo and contains the files needed to run foo with Emacs only. This package owns the director /usr/share/emacs/site-packages/lisp/foo.
5. xemacs-foo-el. This sub-package contains the elisp source files corresponding to the compiled elisp files in package xemacs-foo. This sub-package Requires: xemacs-foo, as the directory in which the elisp source files are installed to is owned by xemacs-foo.
For the Requires mentioned in 1-5 above, the exact %{version}-%{release} should be matched.
For convenience, there are two macros at the top of the file which you should customise to your package. You do not have to use the macros placed at the top of the file, but they help readability and make writing a spec file for a new package much quicker.
%global pkg foo %global pkgname Foo Name: emacs-common-%{pkg} Version: Release: 1%{?dist} Summary: Group: License: URL: Source0: BuildArch: noarch BuildRequires: emacs BuildRequires: xemacs Requires: %description %{pkgname} is an add-on package for GNU Emacs and XEmacs. It does wonderful things... This package contains the files common to both the GNU Emacs and XEmacs %{pkgname} packages. %package -n emacs-%{pkg} Summary: Compiled elisp files to run %{pkgname} under GNU Emacs Group: Requires: emacs(bin) >= %{_emacs_version} Requires: emacs-common-%{pkg} = %{version}-%{release} %description -n emacs-%{pkg} This package contains the byte compiled elisp packages to run %{pkgname} with GNU Emacs. %package -n emacs-%{pkg}-el Summary: Elisp source files for %{pkgname} under GNU Emacs Group: Requires: emacs-%{pkg} = %{version}-%{release} %description -n emacs-%{pkg}-el This package contains the elisp source files for %{pkgname} under GNU Emacs. You do not need to install this package to run %{pkgname}. Install the emacs-%{pkg} package to use %{pkgname} with GNU Emacs. %package -n xemacs-%{pkg} Summary: Compiled elisp files to run %{pkgname} under XEmacs Group: Requires: xemacs(bin) >= %{_xemacs_version} Requires: emacs-common-%{pkg} = %{version}-%{release} %description -n xemacs-%{pkg} This package contains the byte compiled elisp packages to use %{pkgname} with XEmacs. %package -n xemacs-%{pkg}-el Summary: Elisp source files for %{pkgname} under XEmacs Group: Requires: xemacs-%{pkg} = %{version}-%{release} %description -n xemacs-%{pkg}-el This package contains the elisp source files for %{pkgname} under XEmacs. You do not need to install this package to run %{pkgname}. Install the xemacs-%{pkg} package to use %{pkgname} with XEmacs. %prep %setup -q -n %{pkg}-%{version} %build %install %post %preun %files %defattr(-,root,root,-) %doc %files -n emacs-%{pkg} %defattr(-,root,root,-) %{_emacs_sitelispdir}/%{pkg}/*.elc %{_emacs_sitestartdir/*.el %dir %{_emacs_sitelispdir}/%{pkg} %files -n emacs-%{pkg}-el %defattr(-,root,root,-) %{_emacs_sitelispdir}/%{pkg}/*.el %files -n xemacs-%{pkg} %defattr(-,root,root,-) %{_xemacs_sitelispdir}/%{pkg}/*.elc %{_xemacs_sitestartdir}/*.el %dir %{_xemacs_sitelispdir}/%{pkg} %files -n xemacs-%{pkg}-el %defattr(-,root,root,-) %{_xemacs_sitelispdir}/%{pkg}/*.el %changelog
Template for a add-on package for GNU Emacs only
This is a template for a package for GNU Emacs only. The main package is called emacs-foo and contains all files needed to run package foo with GNU Emacs. There is a subpackage called emacs-foo-el which installs the elisp source files. emacs-foo owns the directory into which it is installed (/usr/share/emacs/site-lisp/foo), and so emacs-foo-el Requires emacs-foo with the matching version and release tag.
%global pkg foo %global pkgname Foo Name: emacs-%{pkg} Version: Release: 1%{?dist} Summary: Group: License: URL: Source0: BuildArch: noarch BuildRequires: emacs Requires: emacs(bin) >= %{_emacs_version} %description %{pkgname} is an add-on package for GNU Emacs. It does wonderful things... %package -n %{name}-el Summary: Elisp source files for %{pkgname} under GNU Emacs Group: Requires: %{name} = %{version}-%{release} %description -n %{name}-el This package contains the elisp source files for %{pkgname} under GNU Emacs. You do not need to install this package to run %{pkgname}. Install the %{name} package to use %{pkgname} with GNU Emacs. %prep %setup -q -n %{pkg}-%{version} %build %install %post %preun %files %defattr(-,root,root,-) %doc %{_emacs_sitelispdir}/%{pkg}/*.elc %{_emacs_sitestartdir}/*.el %dir %{_emacs_sitelispdir}/%{pkg} %files -n %{name}-el %defattr(-,root,root,-) %{_emacs_sitelispdir}/%{pkg}/*.el %changelog
Principles behind the guidelines
The existence of the GNU Emacs and XEmacs variants makes packaging Emacs add-on packaging slightly complex. GNU Emacs and XEmacs have different philosophies regarding add-on packages.
XEmacs has its own packaging system and maintains and distributes its own library of third party add-on modules. These are distributed in Fedora in the xemacs-packages-base and xemacs-packages-extra packages. GNU Emacs doesn't have any equivalent system, and third party add-ons are left for the user or distribution to install.
The packaging naming guidelines state that:
Packages of emacs add-on components (code that adds additional functionality to emacs compatible editors) have their own naming scheme. It is often the case that a component will add functionality to several different compatible editors, such as GNU Emacs and XEmacs (and possibly development versions of these editors). The package name should take into account the upstream name of the emacs component.
Where a component adds functionality to more than one emacs compatible editor, the package name should be of the form emacs-common-$NAME. In this case, the main package should contain only files common to all emacs compatible editors, and the code specific to each should be placed in a subpackage reflecting the specific editor $EDITOR-$NAME eg. xemacs-$NAME, emacs-$NAME (the latter being the package specific to GNU Emacs). An example of this scheme can be found in the package emacs-common-muse.
Where a component is designed to add functionality to only a single emacs compatible editor, the main package name should reflect this by being called $EDITOR-$NAME. An example of this situation can be found in the package emacs-auctex, which is built only for GNU Emacs.
Wherever possible, we encourage making an add-on package available for both GNU Emacs and XEmacs. One common case where that is not desireable is when an add-on package is already available for XEmacs in either xemacs-packages-base or xemacs-packages-extra. For example VM (a mail reader for Emacs) is provided for XEmacs in the xemacs-packages-extra package, but is not included in the emacs or emacs-common packages. Therefore it is sensible to create a package called emacs-vm which is the VM package for GNU Emacs only. Another such example is AUCTeX.
Location of installed files
GNU Emacs
For GNU Emacs, files for add-on package foo should be placed in %{_emacs_sitelispdir}/foo which evaluates to /usr/share/emacs/site-lisp/foo.
Usually an add-on package will require a startup file, and this should be called foo-init.el and be placed in %{_emacs_sitestartdir} which evaluates to /usr/share/emacs/site-lisp/site-start.d/.
XEmacs
XEmacs expects add-on packages to be installed under %{_xemacs_sitepkgdir} which evaluates to /usr/share/xemacs/site-packages.
Lisp files for add-on package foo should be placed in %{_xemacs_sitelispdir}/foo which evaluates to %{_xemacs_sitepkgdir}/lisp/foo.
Other files for the add-on which are not elisp files should be placed in package specific sub-directories under %{_xemacs_sitepkgdir} eg. %{_xemacs_sitepkgdir}/etc/foo.
Usually an add-on package will require a startup file, and this should be called foo-init.el and be placed in %{_xemacs_sitestartdir} which evaluates to /usr/share/xemacs/site-packages/lisp/site-start.d/.
Packaging of source elisp files
Typically, an Emacs add-on package will be compiled from source elisp files. The resulting compiled elisp files will then be included in the relevant emacs-foo and xemacs-foo packages. However, these packages SHOULD NOT contain uncompiled elisp source files which are not required for the program to run. Rather, following the precedent set by GNU Emacs packaging, the elisp source files should be placed in their own sub-packages, named emacs-foo-el and xemacs-foo-el.
The (x)emacs-foo-el packages are similar in many ways to the -devel subpackages for system libraries. It is often the case that byte compiling the elisp source for one add-on will require the presence of the elisp source for another add-on package at build time for example.
Note however, that having the Elisp source files available may be very useful to the user. For example when debugging a problem with an (X)Emacs package, the Elisp debugger can look up the relevant code or symbol definition in the source lisp file if present.
Presently, for Case II, we do not consider it necessary to split off the Elisp source files into their own sub-package. While this is inconsistent with Case I, the disk space cost is minimal. In the future we may no longer require splitting out the source Elisp files in Case I.
BuildArch for (X)Emacs add-on packages
You should set BuildArch: noarch for add-on packages which only compile elisp files during building.
If the package building process also compiles programs in other languages, you may need to not set BuildArch.
Requires for GNU Emacs and XEmacs
Add-on packages should have appropriate Requires entries for the flavour of (X)Emacs they are targeted at. Both GNU Emacs and XEmacs are available in two different packages - some details of these packages follow.
1. GNU Emacs is packaged as two variants. The emacs package is built with Xorg support to allow the user to run Emacs in a windowed environment. The emacs-nox package is built without Xorg support and hence allows Emacs to be run only in a console. Note:
- Both the emacs and emacs-nox packages have Requires: emacs-common.
- Both emacs and emacs-nox have a virtual Provides: emacs(bin)
2. XEmacs is packaged as two variants. The xemacs package is built with Xorg support to allow the user to run Emacs in a windowed environment. The xemacs-nox package is built without Xorg support and hence allows Emacs to be run only in a console. Note:
- Both the xemacs and xemacs-nox packages have Requires: xemacs-common.
- Both xemacs and xemacs-nox have a virtual Provides: xemacs(bin)
Assuming your add-on package will work in both a windowed and a console (X)Emacs session, it is wrong to have Requires: emacs or Requires: xemacs as that would pull in a dependency on Xorg even if the console variants of (X)Emacs was installed. Rather you should use Requires: xemacs(bin) for XEmacs add-on packages, and Requires: emacs(bin) for GNU Emacs add-on packages.
If the package ONLY works with Xorg support built into (X)Emacs, then the packages should have Requires: emacs or Requires: xemacs. This is very uncommon.
Why we need versioned Requires
Many elisp packages aim for backwards source level compatibility by checking whether some features exist in the (X)Emacs in use when the package is being run or byte-compiled. If yes, they use what's available. If no, they provide their own versions of missing functions, macros etc. This propagates into *.elc during byte compilation, and quite a few functions do get added between upstream (X)Emacs releases.
So let's say I byte-compile a package into *.elc with XEmacs 21.5.28. Elisp package quux checks if the foo-bar function is available in the XEmacs being used to byte-compile it. Yes, it is, so the internal backwards compat version of foo-bar included in quux does not end up in the *.elc. Now, let's assume foo-bar was added in XEmacs 21.5.28 and didn't exist in 21.5.27 and we're trying to run the *.elc with 21.5.27 -> boom, foo-bar is not available. Note: this wouldn't happen if only *.el were shipped - *.elc are the potential and likely problem. Requiring >= version of the (X)Emacs used to byte-compile the *.elc is not the only solution (nor enough for all corner cases), but is the best one we currently have available.
The main package and subpackages will need to have appropriately version Requires to ensure that a recent enough version of (X)Emacs is installed. (X)Emacs byte compiled lisp is usually forward compatible with later (X)Emacs versions, but is frequently not compatible with earlier versions of (X)Emacs.
Determining the Required (X)Emacs version at package build time
It is recommended to derive greater-than-or-equal-to valued versioned dependencies from the version of (X)Emacs used to byte-compile the package at package build time. The emacs-common and xemacs-common packages both place files in /etc/rpm which define macros containing the version of (X)Emacs installed. The relevant macros are:
%{_emacs_version} %{_xemacs_version}
Other packages containing Emacsen add-ons (Case II)
It is often the case that a software package, while not being primarily an Emacs add-on package, will contain components for (X)Emacs. For example, the Gnuplot program contains some elisp files for editing Gnuplot input files in GNU Emacs and running Gnuplot from GNU Emacs. In this case, we want to enable the (X)Emacs support IF (X)Emacs is installed, but we don't want to mandate the installation of (X)Emacs on installation of this package since (X)Emacs is not required for providing the core functionality of the package. To enable this, the emacs-filesystem and xemacs-filesystem sub-packages were created which own the /usr/share/emacs/site-lisp and /usr/share/xmeacs/site-packages directories respectively. A package can then Require these (x)emacsfilesystem packages in order to install their Elisp files without pulling in (X)Emacs and their dependency chain.