From Fedora Project Wiki

Revision as of 10:46, 12 October 2020 by Kparal (talk | contribs) (mentioning /boot is probably not needed here, improve formatting a bit)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Associated release criterion
This test case is associated with the Fedora_41_Beta_Release_Criteria#Custom_partitioning release criterion. If you are doing release validation testing, a failure of this test case may be a breach of that release criterion. If so, please file a bug and nominate it as blocking the appropriate milestone, using the blocker bug nomination page.

Description

A complete installation using the ext4 file system for the root partition.

Setup

  1. Prepare a test system with a working, supported storage device of sufficient size for a Fedora install, and a Fedora installation medium that uses the GTK-based installer. Do not use Fedora Workstation live on Fedora 41+, as that uses the webui-based installer.

How to test

  1. Boot the GTK-based installer using any available means. Do not use Fedora Workstation live on Fedora 41+, as that uses the webui-based installer.
  2. Proceed to the installer's main screen, making sensible choices, and enter the Installation Destination screen.
  3. Ensure only the single target device you prepared is selected as the installation target disk.
  4. Ensure the Custom option is selected under Storage Configuration, and complete this screen.
  5. On the MANUAL PARTITIONING screen, delete all existing partitions (if any).
  6. Pick Standard partition from the New mount points will use the following partitioning scheme drop-down
  7. Click the Click here to create them automatically link
  8. Select the root filesystem (/)
  9. Check the File System field. If it is not set to ext4, change it to ext4 and click Update settings
  10. Complete the installation process, making sensible selections for all other installer options.
  11. Boot the installed system.

Expected Results

  1. The expected partition layout should be created on the target device(s).
  2. The install process should complete successfully and the installed system should boot as expected.