From Fedora Project Wiki

Revision as of 14:25, 30 September 2008 by Jjmcd (talk | contribs) (→‎AVR)

< Docs | Beats

Fedora 10 includes a number of applications to support embedded development on a variety of targets. Included are assemblers, compilers, debuggers, programmers, IDEs and assorted utilities.

AVR

avrdude Software for programming Atmel AVR microcontroller

AVRDUDE is a program for programming Atmel's AVR CPU's. It can program the Flash and EEPROM, and where supported by the serial programming protocol, it can program fuse and lock bits. AVRDUDE also supplies a direct instruction mode allowing one to issue any programming instruction to the AVR chip regardless of whether AVRDUDE implements that specific feature of a particular chip.


avr-gcc Cross Compiling GNU GCC targeted at avr

This is a Cross Compiling version of GNU GCC, which can be used to compile for the avr platform, instead of for the native i386 platform.


avr-gcc-c++ Cross Compiling GNU GCC targeted at avr

This package contains the Cross Compiling version of g++, which can be used to compile c++ code for the avr platform, instead of for the native i386 platform.


avr-libc C library for use with GCC on Atmel AVR microcontrollers

AVR Libc is a Free Software project whose goal is to provide a high quality C library for use with GCC on Atmel AVR microcontrollers.

AVR Libc is licensed under a single unified license. This so-called modified Berkeley license is intented to be compatible with most Free Software licenses like the GPL, yet impose as little restrictions for the use of the library in closed-source commercial applications as possible.


avr-binutils Cross Compiling GNU binutils targeted at avr

This is a Cross Compiling version of GNU binutils, which can be used to assemble and link binaries for the avr platform, instead of for the native i386 platform.


avr-gdb GDB for (remote) debugging avr binaries

This is a special version of GDB, the GNU Project debugger, for (remote) debugging avr binaries. GDB allows you to see what is going on inside another program while it executes or what another program was doing at the moment it crashed.


avarice Program for interfacing the Atmel JTAG ICE to GDB

Program for interfacing the Atmel JTAG ICE to GDB to allow users to debug their embedded AVR target

Microchip PIC

gputils Development utilities for Microchip (TM) PIC (TM) microcontrollers

This is a collection of development tools for Microchip (TM) PIC (TM) microcontrollers. This is ALPHA software: there may be serious bugs in it, and it's nowhere near complete. gputils currently only implements a subset of the features available with Microchip's tools. See the documentation for an up-to-date list of what gputils can do.


gpsim A simulator for Microchip (TM) PIC (TM) microcontrollers

gpsim is a simulator for Microchip (TM) PIC (TM) microcontrollers. It supports most devices in Microchip's 12-bit, 14bit, and 16-bit core families. In addition, gpsim supports dynamically loadable modules such as LED's, LCD's, resistors, etc. to extend the simulation environment beyond the PIC.


ktechlab Development and simulation of microcontrollers and electronic circuits

KTechlab is a development and simulation environment for microcontrollers and electronic circuits, distributed under the GNU General Public License. KTechlab consists of several well-integrated components:

  • A circuit simulator, capable of simulating logic, linear devices and some nonlinear devices.
  • Integration with gpsim, allowing PICs to be simulated in circuit.
  • A schematic editor, which provides a rich real-time feedback of the simulation.
  • A flowchart editor, allowing PIC programs to be constructed visually.
  • MicroBASIC; a BASIC-like compiler for PICs, written as a companion program to KTechlab.
  • An embedded Kate part, which provides a powerful editor for PIC programs.
  • Integrated assembler and disassembler via gpasm and gpdasm.


pikdev IDE for development of PICmicro based application (under Linux/KDE)

PiKdev is a simple IDE dedicated to the development of PIC based applications under KDE. Features:

  • Integrated editor
  • Project management
  • Integrated programming engine for 12, 14 and 16 bits PIC (flash or EPROM technology)
  • Support for parallel and serial port programmers
  • KDE compliant look-and-feel

WARNING: Administrator have to see the README.Fedora file locate in the /usr/share/doc/pikdev-0.9.2 directory to complete full feature installation.


piklab Development environment for applications based on PIC & dsPIC

Piklab is a graphic development environment for PIC and dsPIC microcontrollers. It interfaces with various toochains for compiling and assembling and it supports several Microchip and direct programmers. WARNING: Administrator have to see the README.Fedora file locate in the /usr/share/doc/piklab-0.15.0 directory to complete full feature installation.


pikloops Code generator for PIC delays

PiKLoop generate for you code to create delays for Microchip PIC microcontrollers. It is an useful companion for Pikdev or Piklab IDE.


Others/Processor agnostic

dfu-programmer A device firmware update based USB programmer for Atmel chips

A linux based command-line programmer for Atmel chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. Currently supported chips: 8051, AVR, at89c51snd1c, at90usb1287, at89c5130, at90usb1286, at89c5131, at90usb647, at89c5132, at90usb646, at90usb162, and at90usb82.


sdcc Small Device C Compiler

sdcc-2.6.0-12 SDCC is a C compiler for 8051 class and similar microcontrollers. The package includes the compiler, assemblers and linkers, a device simulator and a core library. The processors supported (to a varying degree) include the 8051, ds390, z80, hc08, and PIC.


uisp Universal In-System Programmer for Atmel AVR and 8051

Uisp is utility for downloading/uploading programs to AVR devices. Can also be used for some Atmel 8051 type devices. In addition, uisp can erase the device, write lock bits, verify and set the active segment. For use with the following hardware to program the devices: pavr, stk500, Atmel STK500, dapa, Direct AVR Parallel Access, stk200, Parallel Starter Kit, STK200, STK300, abb, Altera, ByteBlasterMV Parallel Port Download Cable, avrisp, Atmel AVR, bsd, fbprg (parallel), dt006 (parallel), dasa serial (RESET=RTS SCK=DTR MOSI=TXD MISO=CTS), dasa2 serial (RESET=!TXD SCK=RTS MOSI=DTR MISO=CTS)


simcoupe SAM Coupe emulator (spectrum compatible)

SimCoupe emulates an 8bit Z80 based home computer, released in 1989 by Miles Gordon Technology. The SAM Coupe was largely spectrum compatible, with much improved hardware


sjasm A z80 cross assemble

SjASM is a two pass macro Z80 cross assembler


z88dk A Z80 cross compiler

z88dk is a Z80 cross compiler capable of generating binary files for a variety of Z80 based machines (such as the ZX81, Spectrum, Jupiter Ace and some TI calculators).