From Fedora Project Wiki

(Add port for iax)
(more on testing)
Line 43: Line 43:
* service asterisk restart
* service asterisk restart
* Open ports 5060/udp 5060/tcp for inbound SIP. Allowing related connections should take care of RTP.
* Open ports 5060/udp 5060/tcp for inbound SIP. Allowing related connections should take care of RTP.
** For example if you aren't using a firewall tool you can add the following to /etc/sysconfig/iptables and service iptables restart:
*** -A INPUT -m state --state NEW -m tcp -p tcp --dport 5060 -j ACCEPT
*** -A INPUT -m state --state NEW -m udp -p udp --dport 5060 -j ACCEPT
* Open port 4569/udp for iax2, if we play with that.
* Open port 4569/udp for iax2, if we play with that.
* If you want to test connecting with a sip client you can edit /etc/asterisk/users.conf to replace the modified md5secret with a correct md5secret or just secret.


== Targeted Trac Tickets ==
== Targeted Trac Tickets ==

Revision as of 04:20, 18 October 2009

Note.png
Page description
This page is to lay out and plan the specifics the work we will complete at the FAD. The FAD Fedora Talk 2009 page explains the original goals and planning done for this event.

Participants

Note.png
Travel days
Travel days are Thursday and Sunday. On-site participants are leaving early and no on-site hacking will take place on Sunday.
Name Remote? Fri Sat Sun Core Tasks
John X X Travel Project Management + Documentation + Requirements
Paul X X Hosting, chauffeuring, hacking when no one's looking
Ian X X Travel
Jon X X Travel Testing, puppetizing, general hacking, learn Asterisk, moral support, etc :D
Jared X X Be the Asterisk guru + Bring lots of VoIP equipment + Documentation
Jeff X X Travel Asterisk hacking
Mike X puppetizing and testing
Clint X X X X puppetizing and testing (shadowing Mike)
Darren X X testing
Bruno X X X AM testing, possibly some asterisk config hacking

Asterisk Packages & Installation Instructions

I haven't testing the resulting set up yet, but this should be pretty good for getting things mostly there.

  • Base system should be F12
  • wget http://kojipkgs.fedoraproject.org/packages/asterisk/1.6.2.0/0.6.rc3.fc13/i686/asterisk-1.6.2.0-0.6.rc3.fc13.i686.rpm for i686 systems.
  • yum install --nogpgcheck asterisk-1.6.2.0-0.6.rc3.fc13.i686.rpm asterisk-sounds-core-en-wav
    • This will pull in some other packages, including tex stuff (presumably for documentation).
    • I think we can use the F12 asterisk-sounds-core until there is an F13 version available, but I haven't got that far in my testing.
    • I am not sure which codecs we need and what issues installing multiple languages causes.
  • git clone git://fedorapeople.org/~jcollie/ftalk-asterisk-configs.git ftalk-asterisk-configs
  • cp -f ftalk-asterisk-configs/* /etc/asterisk
  • chkconfig asterisk on
  • service asterisk restart
  • Open ports 5060/udp 5060/tcp for inbound SIP. Allowing related connections should take care of RTP.
    • For example if you aren't using a firewall tool you can add the following to /etc/sysconfig/iptables and service iptables restart:
      • -A INPUT -m state --state NEW -m tcp -p tcp --dport 5060 -j ACCEPT
      • -A INPUT -m state --state NEW -m udp -p udp --dport 5060 -j ACCEPT
  • Open port 4569/udp for iax2, if we play with that.
  • If you want to test connecting with a sip client you can edit /etc/asterisk/users.conf to replace the modified md5secret with a correct md5secret or just secret.

Targeted Trac Tickets

  • Primary targets:
    • #309 -- Asterisk recording
    • #395 -- Audio streaming of Fedora Board conf-calls
    • #453 -- Asterisk/gstreamer solution for town hall meetings
    • #1160 -- streaming and recording moderated conf-calls
  • Secondary targets (as time allows):

Use Cases

Explanations and proposed usage of different FedoraTalk functionality